The board uses twl6040 codec connected via McPDM link. McBSP1 and McBSP2 can
be used for FM/BT.
At the same time move the pinctrl handling to the correct place - under the
corresponding nodes.
Audio connectors on the board:
Headset in/out
Stereo Line out
Stereo Line in.
Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 43 +++++++++++++++++++++++++++++++++++-----
1 file changed, 38 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index c9286166fad5..159720d6c956 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -100,14 +100,33 @@
};
};
};
+
+ sound: sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "omap5-uevm";
+
+ ti,mclk-freq = <19200000>;
+
+ ti,mcpdm = <&mcpdm>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In";
+ };
};
&omap5_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
- &mcpdm_pins
- &mcbsp1_pins
- &mcbsp2_pins
&usbhost_pins
&led_gpio_pins
>;
@@ -528,8 +547,22 @@
};
};
-&mcbsp3 {
- status = "disabled";
+&mcpdm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcpdm_pins>;
+ status = "okay";
+};
+
+&mcbsp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+ status = "okay";
+};
+
+&mcbsp2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+ status = "okay";
};
&usbhshost {
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
