This patch adds bch8 ecc software fallback which is mostly used by omap3s because they lack hardware elm support.
Fixes: 0611c41934ab35ce84dea34ab291897ad3cbc7be (ARM: OMAP2+: gpmc: update gpmc_hwecc_bch_capable() for new platforms and ECC schemes) Cc: <[email protected]> # 3.15.x+ Signed-off-by: Christoph Fritz <[email protected]> --- arch/arm/mach-omap2/gpmc-nand.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 17cd393..93914d2 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -50,6 +50,16 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) soc_is_omap54xx() || soc_is_dra7xx()) return 1; + if (ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW || + ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) { + if (cpu_is_omap24xx()) + return 0; + else if (cpu_is_omap3630() && (GET_OMAP_REVISION() == 0)) + return 0; + else + return 1; + } + /* OMAP3xxx do not have ELM engine, so cannot support ECC schemes * which require H/W based ECC error detection */ if ((cpu_is_omap34xx() || cpu_is_omap3630()) && @@ -57,14 +67,6 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) (ecc_opt == OMAP_ECC_BCH8_CODE_HW))) return 0; - /* - * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1 - * and AM33xx derivates. Other chips may be added if confirmed to work. - */ - if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) && - (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) - return 0; - /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */ if (ecc_opt == OMAP_ECC_HAM1_CODE_HW) return 1; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
