There's no longer need for tracking the phy state in the driver
with asleep, we can now rely on runtime PM.

Signed-off-by: Tony Lindgren <t...@atomide.com>
---
 drivers/phy/phy-twl4030-usb.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index 519cc90..24ff3c6 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -163,7 +163,6 @@ struct twl4030_usb {
        int                     irq;
        enum omap_musb_vbus_id_status linkstat;
        bool                    vbus_supplied;
-       u8                      asleep;
 
        struct delayed_work     id_workaround_work;
 };
@@ -388,14 +387,13 @@ static int twl4030_usb_runtime_suspend(struct device *dev)
        struct twl4030_usb *twl = dev_get_drvdata(dev);
 
        dev_dbg(twl->dev, "%s\n", __func__);
-       if (twl->asleep)
+       if (pm_runtime_suspended(dev))
                return 0;
 
        __twl4030_phy_power(twl, 0);
        regulator_disable(twl->usb1v5);
        regulator_disable(twl->usb1v8);
        regulator_disable(twl->usb3v1);
-       twl->asleep = 1;
 
        return 0;
 }
@@ -406,7 +404,7 @@ static int twl4030_usb_runtime_resume(struct device *dev)
        int res;
 
        dev_dbg(twl->dev, "%s\n", __func__);
-       if (!twl->asleep)
+       if (pm_runtime_active(dev))
                return 0;
 
        res = regulator_enable(twl->usb3v1);
@@ -435,7 +433,6 @@ static int twl4030_usb_runtime_resume(struct device *dev)
                          twl4030_usb_read(twl, PHY_CLK_CTRL) |
                          (PHY_CLK_CTRL_CLOCKGATING_EN |
                           PHY_CLK_CTRL_CLK32K_EN));
-       twl->asleep = 0;
 
        return 0;
 }
@@ -560,10 +557,10 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
                 */
                if ((status == OMAP_MUSB_VBUS_VALID) ||
                    (status == OMAP_MUSB_ID_GROUND)) {
-                       if (twl->asleep)
+                       if (pm_runtime_suspended(twl->dev))
                                pm_runtime_get_sync(twl->dev);
                } else {
-                       if (!twl->asleep) {
+                       if (pm_runtime_active(twl->dev)) {
                                pm_runtime_mark_last_busy(twl->dev);
                                pm_runtime_put_autosuspend(twl->dev);
                        }
@@ -572,7 +569,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
        }
 
        /* don't schedule during sleep - irq works right then */
-       if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) {
+       if (status == OMAP_MUSB_ID_GROUND && pm_runtime_active(twl->dev)) {
                cancel_delayed_work(&twl->id_workaround_work);
                schedule_delayed_work(&twl->id_workaround_work, HZ);
        }
@@ -674,7 +671,6 @@ static int twl4030_usb_probe(struct platform_device *pdev)
        twl->irq                = platform_get_irq(pdev, 0);
        twl->vbus_supplied      = false;
        twl->linkstat           = -EINVAL;
-       twl->asleep             = 1;
        twl->linkstat           = OMAP_MUSB_UNKNOWN;
 
        twl->phy.dev            = twl->dev;
-- 
1.8.1.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to