"Peter 'p2' De Schrijver" <[email protected]> writes:

> This patch removes the check to see if some functional clocks are still
> enabled before entering sleep. 
>
> Signed-off-by: Peter 'p2' De Schrijver <[email protected]>

Thanks, pushing along with updated C1 patch.

Kevin

> ---
>  arch/arm/mach-omap2/pm34xx.c |   46 
> ------------------------------------------
>  1 files changed, 0 insertions(+), 46 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index e12ff2a..008a4d2 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -453,58 +453,12 @@ void omap_sram_idle(void)
>       omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
>  }
>  
> -/*
> - * Check if functional clocks are enabled before entering
> - * sleep. This function could be behind CONFIG_PM_DEBUG
> - * when all drivers are configuring their sysconfig registers
> - * properly and using their clocks properly.
> - */
> -static int omap3_fclks_active(void)
> -{
> -     u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
> -             fck_cam = 0, fck_per = 0, fck_usbhost = 0;
> -
> -     fck_core1 = cm_read_mod_reg(CORE_MOD,
> -                                 CM_FCLKEN1);
> -     if (omap_rev() > OMAP3430_REV_ES1_0) {
> -             fck_core3 = cm_read_mod_reg(CORE_MOD,
> -                                         OMAP3430ES2_CM_FCLKEN3);
> -             fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
> -                                       CM_FCLKEN);
> -             fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
> -                                           CM_FCLKEN);
> -     } else
> -             fck_sgx = cm_read_mod_reg(GFX_MOD,
> -                                       OMAP3430ES2_CM_FCLKEN3);
> -     fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
> -                               CM_FCLKEN);
> -     fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
> -                               CM_FCLKEN);
> -     fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
> -                               CM_FCLKEN);
> -
> -     /* Ignore UART clocks.  These are handled by UART core (serial.c) */
> -     fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
> -     fck_per &= ~OMAP3430_EN_UART3;
> -
> -     /* Ignore GPIO clocks.  Handled by GPIO prepare-idle hooks */
> -     fck_per &= ~(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
> -                  OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 | OMAP3430_EN_GPIO6);
> -
> -     if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
> -         fck_cam | fck_per | fck_usbhost)
> -             return 1;
> -     return 0;
> -}
> -
>  int omap3_can_sleep(void)
>  {
>       if (!enable_dyn_sleep)
>               return 0;
>       if (!omap_uart_can_sleep())
>               return 0;
> -     if (omap3_fclks_active())
> -             return 0;
>       if (atomic_read(&sleep_block) > 0)
>               return 0;
>       return 1;
> -- 
> 1.5.6.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to