Add RAMINIT specific bits into the DCAN nodes.
Signed-off-by: Roger Quadros <[email protected]>
---
arch/arm/boot/dts/am4372.dtsi | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index d38a0ed..33d27cd 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -899,7 +899,10 @@
clocks = <&dcan0_fck>;
clock-names = "fck";
reg = <0x481cc000 0x2000
- 0x44e10644 0x4>;
+ 0x644 0x4>; /* index to RAMINIT reg within
syscon */
+ raminit-syscon = <&am43xx_control_module>;
+ raminit-start-bit = <0>;
+ raminit-done-bit = <8>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -910,7 +913,10 @@
clocks = <&dcan1_fck>;
clock-names = "fck";
reg = <0x481d0000 0x2000
- 0x44e10644 0x4>;
+ 0x644 0x4>; /* index to RAMINIT reg within
syscon */
+ raminit-syscon = <&am43xx_control_module>;
+ raminit-start-bit = <1>;
+ raminit-done-bit = <9>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
