Hi, Some hardware (TI am43xx) has a buggy RAMINIT DONE mechanism and it might not always set the DONE bit. This will result in a lockup in c_can_hw_raminit_wait_ti(), so patch 1 adds a timeout mechanism there.
There is a non compliancy within TI platforms with respect to the layout of the RAMINIT register. The patches 2 and 3 address this issue and make a flexible but standard way of defining the RAMINIT hardware register layout in the device tree. The RAMINIT register is accessed using the syscon regmap framework. Patches available at [email protected]:rogerq/linux.git [for-v3.18/can] Changelog: v2: - added "ti" vendor prefix to TI specific raminit properties. - split DTS changes into a separate series cheers, -roger --- Roger Quadros (3): can: c_can_platform: Fix c_can_hw_raminit_ti() and add timeout net: can: c_can: Add syscon/regmap RAMINIT mechanism net: can: c_can: Add support for START pulse in RAMINIT sequence .../devicetree/bindings/net/can/c_can.txt | 10 ++ drivers/net/can/c_can/c_can.h | 12 +- drivers/net/can/c_can/c_can_platform.c | 123 ++++++++++++++++----- 3 files changed, 114 insertions(+), 31 deletions(-) -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
