On Wednesday 10 September 2014 07:26 PM, Nishanth Menon wrote:
> On 09/10/2014 08:37 AM, Mugunthan V N wrote:
>> Adding CPSW phy-id, CPSW and MDIO pinmux configuration for active and
>> sleep states and enable them in board evm dts file.
>>
>> Signed-off-by: Mugunthan V N <mugunthan...@ti.com>
>> ---
>> arch/arm/boot/dts/dra7-evm.dts | 107
>> +++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 107 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
>> index 50f8022..e5c4e33 100644
>> --- a/arch/arm/boot/dts/dra7-evm.dts
>> +++ b/arch/arm/boot/dts/dra7-evm.dts
>> @@ -151,6 +151,87 @@
>> 0xd0 (PIN_OUTPUT | MUX_MODE0) /*
>> gpmc_be0n_cle */
>> >;
>> };
>> +
>> + cpsw_default: cpsw_default {
>> + pinctrl-single,pins = <
>> + /* Slave 1 */
>> + 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
>> + 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
>> + 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
>> + 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
>> + 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
>> + 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
>> + 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
>> + 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
>> + 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
>> + 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
>> + 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
>> + 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
>
> Cant we do this based on emac0 and emac1?
Cant because CPSW is a single ethernet device and dual EMAC is just a
feature done by register two network device.
>
>> +
>> + /* Slave 2 */
>> + 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
>
> NAK. reason comment style -> we use the style:
> /* mode0_name.mode3_name */
Will fix this in next version
>
>> + 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
>> + 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
>> + 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
>> + 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
>> + 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
>> + 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
>> + 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
>> + 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
>> + 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
>> + 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
>> + 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
>> + >;
>> +
>> + };
>> +
>> + cpsw_sleep: cpsw_sleep {
>> + pinctrl-single,pins = <
>> + /* Slave 1 */
>> + 0x250 (MUX_MODE15)
>> + 0x254 (MUX_MODE15)
>> + 0x258 (MUX_MODE15)
>> + 0x25c (MUX_MODE15)
>> + 0x260 (MUX_MODE15)
>> + 0x264 (MUX_MODE15)
>> + 0x268 (MUX_MODE15)
>> + 0x26c (MUX_MODE15)
>> + 0x270 (MUX_MODE15)
>> + 0x274 (MUX_MODE15)
>> + 0x278 (MUX_MODE15)
>> + 0x27c (MUX_MODE15)
>> +
>> + /* Slave 1 */
> ^^ Slave 1?
Will fix this in next version
>> + 0x198 (MUX_MODE15)
>> + 0x19c (MUX_MODE15)
>> + 0x1a0 (MUX_MODE15)
>> + 0x1a4 (MUX_MODE15)
>> + 0x1a8 (MUX_MODE15)
>> + 0x1ac (MUX_MODE15)
>> + 0x1b0 (MUX_MODE15)
>> + 0x1b4 (MUX_MODE15)
>> + 0x1b8 (MUX_MODE15)
>> + 0x1bc (MUX_MODE15)
>> + 0x1c0 (MUX_MODE15)
>> + 0x1c4 (MUX_MODE15)
>> + >;
>> + };
>> +
>> + davinci_mdio_default: davinci_mdio_default {
>> + pinctrl-single,pins = <
>> + /* MDIO */
> ^^ you can drop the comment. it is redundant.
Will remove this in next version
>> + 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_data */
>> + 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk */
>> + >;
>> + };
>> +
>> + davinci_mdio_sleep: davinci_mdio_sleep {
>> + pinctrl-single,pins = <
>> + 0x23c (MUX_MODE15)
>> + 0x240 (MUX_MODE15)
>> + >;
>> + };
>> +
>> };
>>
>> &i2c1 {
>> @@ -504,3 +585,29 @@
>> &usb2_phy2 {
>> phy-supply = <&ldousb_reg>;
>> };
>> +
>> +&mac {
>> + status = "okay";
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&cpsw_default>;
>> + pinctrl-1 = <&cpsw_sleep>;
>> + dual_emac;
>> +};
>> +
>> +&cpsw_emac0 {
>> + phy_id = <&davinci_mdio>, <2>;
>> + phy-mode = "rgmii";
>> + dual_emac_res_vlan = <1>;
>> +};
>> +
>> +&cpsw_emac1 {
>> + phy_id = <&davinci_mdio>, <3>;
>> + phy-mode = "rgmii";
>> + dual_emac_res_vlan = <2>;
>> +};
>> +
>> +&davinci_mdio {
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&davinci_mdio_default>;
>> + pinctrl-1 = <&davinci_mdio_sleep>;
>> +};
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
