Removes omap-hdmi DAI driver, omap-hdmi-card driver, the related
Kconfig options, and Makefile entries. The HDMI DAI drivers has been
integrated directly to OMAP4+ HDMI drivers and simple-card driver is
used instead of omap-hdmi-card driver.

Signed-off-by: Jyri Sarha <jsa...@ti.com>
---
 sound/soc/omap/Kconfig          |   13 --
 sound/soc/omap/Makefile         |    4 -
 sound/soc/omap/omap-hdmi-card.c |   87 ----------
 sound/soc/omap/omap-hdmi.c      |  364 ---------------------------------------
 sound/soc/omap/omap-hdmi.h      |   38 ----
 5 files changed, 506 deletions(-)
 delete mode 100644 sound/soc/omap/omap-hdmi-card.c
 delete mode 100644 sound/soc/omap/omap-hdmi.c
 delete mode 100644 sound/soc/omap/omap-hdmi.h

diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index 511fa1a..887da2b 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -12,9 +12,6 @@ config SND_OMAP_SOC_MCBSP
 config SND_OMAP_SOC_MCPDM
        tristate
 
-config SND_OMAP_SOC_HDMI
-       tristate
-
 config SND_OMAP_SOC_HDMI_AUDIO
        tristate "HDMI audio support for OMAP4+ based SoCs"
        depends on SND_OMAP_SOC
@@ -110,16 +107,6 @@ config SND_OMAP_SOC_OMAP_ABE_TWL6040
          - PandaBoard (4430)
          - PandaBoardES (4460)
 
-config SND_OMAP_SOC_OMAP_HDMI
-       tristate "SoC Audio support for Texas Instruments OMAP HDMI"
-       depends on SND_OMAP_SOC && OMAP4_DSS_HDMI && OMAP2_DSS
-       select SND_OMAP_SOC_HDMI
-       select SND_SOC_HDMI_CODEC
-       select OMAP4_DSS_HDMI_AUDIO
-       help
-         Say Y if you want to add support for SoC HDMI audio on Texas 
Instruments
-         OMAP4 chips
-
 config SND_OMAP_SOC_OMAP3_PANDORA
        tristate "SoC Audio support for OMAP3 Pandora"
        depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
index 40688a6..db36fbd 100644
--- a/sound/soc/omap/Makefile
+++ b/sound/soc/omap/Makefile
@@ -3,14 +3,12 @@ snd-soc-omap-objs := omap-pcm.o
 snd-soc-omap-dmic-objs := omap-dmic.o
 snd-soc-omap-mcbsp-objs := omap-mcbsp.o mcbsp.o
 snd-soc-omap-mcpdm-objs := omap-mcpdm.o
-snd-soc-omap-hdmi-objs := omap-hdmi.o
 snd-soc-omap-hdmi-audio-objs := omap-hdmi-audio.o
 
 obj-$(CONFIG_SND_OMAP_SOC) += snd-soc-omap.o
 obj-$(CONFIG_SND_OMAP_SOC_DMIC) += snd-soc-omap-dmic.o
 obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o
 obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o
-obj-$(CONFIG_SND_OMAP_SOC_HDMI) += snd-soc-omap-hdmi.o
 obj-$(CONFIG_SND_OMAP_SOC_HDMI_AUDIO) += snd-soc-omap-hdmi-audio.o
 
 # OMAP Machine Support
@@ -22,7 +20,6 @@ snd-soc-am3517evm-objs := am3517evm.o
 snd-soc-omap-abe-twl6040-objs := omap-abe-twl6040.o
 snd-soc-omap-twl4030-objs := omap-twl4030.o
 snd-soc-omap3pandora-objs := omap3pandora.o
-snd-soc-omap-hdmi-card-objs := omap-hdmi-card.o
 
 obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
 obj-$(CONFIG_SND_OMAP_SOC_RX51) += snd-soc-rx51.o
@@ -32,4 +29,3 @@ obj-$(CONFIG_SND_OMAP_SOC_AM3517EVM) += snd-soc-am3517evm.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040) += snd-soc-omap-abe-twl6040.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) += snd-soc-omap-twl4030.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
-obj-$(CONFIG_SND_OMAP_SOC_OMAP_HDMI) += snd-soc-omap-hdmi-card.o
diff --git a/sound/soc/omap/omap-hdmi-card.c b/sound/soc/omap/omap-hdmi-card.c
deleted file mode 100644
index f649fe8..0000000
--- a/sound/soc/omap/omap-hdmi-card.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * omap-hdmi-card.c
- *
- * OMAP ALSA SoC machine driver for TI OMAP HDMI
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- * Author: Ricardo Neri <ricardo.n...@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/module.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <asm/mach-types.h>
-#include <video/omapdss.h>
-
-#define DRV_NAME "omap-hdmi-audio"
-
-static struct snd_soc_dai_link omap_hdmi_dai = {
-       .name = "HDMI",
-       .stream_name = "HDMI",
-       .cpu_dai_name = "omap-hdmi-audio-dai",
-       .platform_name = "omap-hdmi-audio-dai",
-       .codec_name = "hdmi-audio-codec",
-       .codec_dai_name = "hdmi-hifi",
-};
-
-static struct snd_soc_card snd_soc_omap_hdmi = {
-       .name = "OMAPHDMI",
-       .owner = THIS_MODULE,
-       .dai_link = &omap_hdmi_dai,
-       .num_links = 1,
-};
-
-static int omap_hdmi_probe(struct platform_device *pdev)
-{
-       struct snd_soc_card *card = &snd_soc_omap_hdmi;
-       int ret;
-
-       card->dev = &pdev->dev;
-
-       ret = snd_soc_register_card(card);
-       if (ret) {
-               dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
-               card->dev = NULL;
-               return ret;
-       }
-       return 0;
-}
-
-static int omap_hdmi_remove(struct platform_device *pdev)
-{
-       struct snd_soc_card *card = platform_get_drvdata(pdev);
-
-       snd_soc_unregister_card(card);
-       card->dev = NULL;
-       return 0;
-}
-
-static struct platform_driver omap_hdmi_driver = {
-       .driver = {
-               .name = DRV_NAME,
-               .owner = THIS_MODULE,
-       },
-       .probe = omap_hdmi_probe,
-       .remove = omap_hdmi_remove,
-};
-
-module_platform_driver(omap_hdmi_driver);
-
-MODULE_AUTHOR("Ricardo Neri <ricardo.n...@ti.com>");
-MODULE_DESCRIPTION("OMAP HDMI machine ASoC driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/sound/soc/omap/omap-hdmi.c b/sound/soc/omap/omap-hdmi.c
deleted file mode 100644
index eb9c392..0000000
--- a/sound/soc/omap/omap-hdmi.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * omap-hdmi.c
- *
- * OMAP ALSA SoC DAI driver for HDMI audio on OMAP4 processors.
- * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
- * Authors: Jorge Candelaria <jorge.candela...@ti.com>
- *          Ricardo Neri <ricardo.n...@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-#include <sound/asound.h>
-#include <sound/asoundef.h>
-#include <sound/dmaengine_pcm.h>
-#include <video/omapdss.h>
-#include <sound/omap-pcm.h>
-
-#include "omap-hdmi.h"
-
-#define DRV_NAME "omap-hdmi-audio-dai"
-
-struct hdmi_priv {
-       struct snd_dmaengine_dai_dma_data dma_data;
-       unsigned int dma_req;
-       struct omap_dss_audio dss_audio;
-       struct snd_aes_iec958 iec;
-       struct snd_cea_861_aud_if cea;
-       struct omap_dss_device *dssdev;
-};
-
-static int omap_hdmi_dai_startup(struct snd_pcm_substream *substream,
-                                 struct snd_soc_dai *dai)
-{
-       struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
-       int err;
-       /*
-        * Make sure that the period bytes are multiple of the DMA packet size.
-        * Largest packet size we use is 32 32-bit words = 128 bytes
-        */
-       err = snd_pcm_hw_constraint_step(substream->runtime, 0,
-                                SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 128);
-       if (err < 0) {
-               dev_err(dai->dev, "could not apply constraint\n");
-               return err;
-       }
-
-       if (!priv->dssdev->driver->audio_supported(priv->dssdev)) {
-               dev_err(dai->dev, "audio not supported\n");
-               return -ENODEV;
-       }
-
-       snd_soc_dai_set_dma_data(dai, substream, &priv->dma_data);
-
-       return 0;
-}
-
-static int omap_hdmi_dai_prepare(struct snd_pcm_substream *substream,
-                               struct snd_soc_dai *dai)
-{
-       struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
-
-       return priv->dssdev->driver->audio_enable(priv->dssdev);
-}
-
-static int omap_hdmi_dai_hw_params(struct snd_pcm_substream *substream,
-                                   struct snd_pcm_hw_params *params,
-                                   struct snd_soc_dai *dai)
-{
-       struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
-       struct snd_aes_iec958 *iec = &priv->iec;
-       struct snd_cea_861_aud_if *cea = &priv->cea;
-       int err = 0;
-
-       switch (params_format(params)) {
-       case SNDRV_PCM_FORMAT_S16_LE:
-               priv->dma_data.maxburst = 16;
-               break;
-       case SNDRV_PCM_FORMAT_S24_LE:
-               priv->dma_data.maxburst = 32;
-               break;
-       default:
-               dev_err(dai->dev, "format not supported!\n");
-               return -EINVAL;
-       }
-
-       /*
-        * fill the IEC-60958 channel status word
-        */
-       /* initialize the word bytes */
-       memset(iec->status, 0, sizeof(iec->status));
-
-       /* specify IEC-60958-3 (commercial use) */
-       iec->status[0] &= ~IEC958_AES0_PROFESSIONAL;
-
-       /* specify that the audio is LPCM*/
-       iec->status[0] &= ~IEC958_AES0_NONAUDIO;
-
-       iec->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT;
-
-       iec->status[0] |= IEC958_AES0_CON_EMPHASIS_NONE;
-
-       iec->status[0] |= IEC958_AES1_PRO_MODE_NOTID;
-
-       iec->status[1] = IEC958_AES1_CON_GENERAL;
-
-       iec->status[2] |= IEC958_AES2_CON_SOURCE_UNSPEC;
-
-       iec->status[2] |= IEC958_AES2_CON_CHANNEL_UNSPEC;
-
-       switch (params_rate(params)) {
-       case 32000:
-               iec->status[3] |= IEC958_AES3_CON_FS_32000;
-               break;
-       case 44100:
-               iec->status[3] |= IEC958_AES3_CON_FS_44100;
-               break;
-       case 48000:
-               iec->status[3] |= IEC958_AES3_CON_FS_48000;
-               break;
-       case 88200:
-               iec->status[3] |= IEC958_AES3_CON_FS_88200;
-               break;
-       case 96000:
-               iec->status[3] |= IEC958_AES3_CON_FS_96000;
-               break;
-       case 176400:
-               iec->status[3] |= IEC958_AES3_CON_FS_176400;
-               break;
-       case 192000:
-               iec->status[3] |= IEC958_AES3_CON_FS_192000;
-               break;
-       default:
-               dev_err(dai->dev, "rate not supported!\n");
-               return -EINVAL;
-       }
-
-       /* specify the clock accuracy */
-       iec->status[3] |= IEC958_AES3_CON_CLOCK_1000PPM;
-
-       /*
-        * specify the word length. The same word length value can mean
-        * two different lengths. Hence, we need to specify the maximum
-        * word length as well.
-        */
-       switch (params_format(params)) {
-       case SNDRV_PCM_FORMAT_S16_LE:
-               iec->status[4] |= IEC958_AES4_CON_WORDLEN_20_16;
-               iec->status[4] &= ~IEC958_AES4_CON_MAX_WORDLEN_24;
-               break;
-       case SNDRV_PCM_FORMAT_S24_LE:
-               iec->status[4] |= IEC958_AES4_CON_WORDLEN_24_20;
-               iec->status[4] |= IEC958_AES4_CON_MAX_WORDLEN_24;
-               break;
-       default:
-               dev_err(dai->dev, "format not supported!\n");
-               return -EINVAL;
-       }
-
-       /*
-        * Fill the CEA-861 audio infoframe (see spec for details)
-        */
-
-       cea->db1_ct_cc = (params_channels(params) - 1)
-               & CEA861_AUDIO_INFOFRAME_DB1CC;
-       cea->db1_ct_cc |= CEA861_AUDIO_INFOFRAME_DB1CT_FROM_STREAM;
-
-       cea->db2_sf_ss = CEA861_AUDIO_INFOFRAME_DB2SF_FROM_STREAM;
-       cea->db2_sf_ss |= CEA861_AUDIO_INFOFRAME_DB2SS_FROM_STREAM;
-
-       cea->db3 = 0; /* not used, all zeros */
-
-       /*
-        * The OMAP HDMI IP requires to use the 8-channel channel code when
-        * transmitting more than two channels.
-        */
-       if (params_channels(params) == 2)
-               cea->db4_ca = 0x0;
-       else
-               cea->db4_ca = 0x13;
-
-       cea->db5_dminh_lsv = CEA861_AUDIO_INFOFRAME_DB5_DM_INH_PROHIBITED;
-       /* the expression is trivial but makes clear what we are doing */
-       cea->db5_dminh_lsv |= (0 & CEA861_AUDIO_INFOFRAME_DB5_LSV);
-
-       priv->dss_audio.iec = iec;
-       priv->dss_audio.cea = cea;
-
-       err = priv->dssdev->driver->audio_config(priv->dssdev,
-                                                &priv->dss_audio);
-
-       return err;
-}
-
-static int omap_hdmi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
-                               struct snd_soc_dai *dai)
-{
-       struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
-       int err = 0;
-
-       switch (cmd) {
-       case SNDRV_PCM_TRIGGER_START:
-       case SNDRV_PCM_TRIGGER_RESUME:
-       case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-               err = priv->dssdev->driver->audio_start(priv->dssdev);
-               break;
-       case SNDRV_PCM_TRIGGER_STOP:
-       case SNDRV_PCM_TRIGGER_SUSPEND:
-       case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-               priv->dssdev->driver->audio_stop(priv->dssdev);
-               break;
-       default:
-               err = -EINVAL;
-       }
-       return err;
-}
-
-static void omap_hdmi_dai_shutdown(struct snd_pcm_substream *substream,
-                               struct snd_soc_dai *dai)
-{
-       struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
-
-       priv->dssdev->driver->audio_disable(priv->dssdev);
-}
-
-static const struct snd_soc_dai_ops omap_hdmi_dai_ops = {
-       .startup        = omap_hdmi_dai_startup,
-       .hw_params      = omap_hdmi_dai_hw_params,
-       .prepare        = omap_hdmi_dai_prepare,
-       .trigger        = omap_hdmi_dai_trigger,
-       .shutdown       = omap_hdmi_dai_shutdown,
-};
-
-static struct snd_soc_dai_driver omap_hdmi_dai = {
-       .playback = {
-               .channels_min = 2,
-               .channels_max = 8,
-               .rates = OMAP_HDMI_RATES,
-               .formats = OMAP_HDMI_FORMATS,
-       },
-       .ops = &omap_hdmi_dai_ops,
-};
-
-static const struct snd_soc_component_driver omap_hdmi_component = {
-       .name           = DRV_NAME,
-};
-
-static int omap_hdmi_probe(struct platform_device *pdev)
-{
-       int ret;
-       struct resource *hdmi_rsrc;
-       struct hdmi_priv *hdmi_data;
-       bool hdmi_dev_found = false;
-
-       hdmi_data = devm_kzalloc(&pdev->dev, sizeof(*hdmi_data), GFP_KERNEL);
-       if (hdmi_data == NULL) {
-               dev_err(&pdev->dev, "Cannot allocate memory for HDMI data\n");
-               return -ENOMEM;
-       }
-
-       hdmi_rsrc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!hdmi_rsrc) {
-               dev_err(&pdev->dev, "Cannot obtain IORESOURCE_MEM HDMI\n");
-               return -ENODEV;
-       }
-
-       hdmi_data->dma_data.addr = hdmi_rsrc->start + OMAP_HDMI_AUDIO_DMA_PORT;
-
-       hdmi_rsrc = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-       if (!hdmi_rsrc) {
-               dev_err(&pdev->dev, "Cannot obtain IORESOURCE_DMA HDMI\n");
-               return -ENODEV;
-       }
-
-       hdmi_data->dma_req = hdmi_rsrc->start;
-       hdmi_data->dma_data.filter_data = &hdmi_data->dma_req;
-       hdmi_data->dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-
-       /*
-        * TODO: We assume that there is only one DSS HDMI device. Future
-        * OMAP implementations may support more than one HDMI devices and
-        * we should provided separate audio support for all of them.
-        */
-       /* Find an HDMI device. */
-       for_each_dss_dev(hdmi_data->dssdev) {
-               omap_dss_get_device(hdmi_data->dssdev);
-
-               if (!hdmi_data->dssdev->driver) {
-                       omap_dss_put_device(hdmi_data->dssdev);
-                       continue;
-               }
-
-               if (hdmi_data->dssdev->type == OMAP_DISPLAY_TYPE_HDMI) {
-                       hdmi_dev_found = true;
-                       break;
-               }
-       }
-
-       if (!hdmi_dev_found) {
-               dev_err(&pdev->dev, "no driver for HDMI display found\n");
-               return -ENODEV;
-       }
-
-       dev_set_drvdata(&pdev->dev, hdmi_data);
-       ret = snd_soc_register_component(&pdev->dev, &omap_hdmi_component,
-                                        &omap_hdmi_dai, 1);
-
-       if (ret)
-               return ret;
-
-       return omap_pcm_platform_register(&pdev->dev);
-}
-
-static int omap_hdmi_remove(struct platform_device *pdev)
-{
-       struct hdmi_priv *hdmi_data = dev_get_drvdata(&pdev->dev);
-
-       snd_soc_unregister_component(&pdev->dev);
-
-       if (hdmi_data == NULL) {
-               dev_err(&pdev->dev, "cannot obtain HDMi data\n");
-               return -ENODEV;
-       }
-
-       omap_dss_put_device(hdmi_data->dssdev);
-       return 0;
-}
-
-static struct platform_driver hdmi_dai_driver = {
-       .driver = {
-               .name = DRV_NAME,
-               .owner = THIS_MODULE,
-       },
-       .probe = omap_hdmi_probe,
-       .remove = omap_hdmi_remove,
-};
-
-module_platform_driver(hdmi_dai_driver);
-
-MODULE_AUTHOR("Jorge Candelaria <jorge.candela...@ti.com>");
-MODULE_AUTHOR("Ricardo Neri <ricardo.n...@ti.com>");
-MODULE_DESCRIPTION("OMAP HDMI SoC Interface");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/sound/soc/omap/omap-hdmi.h b/sound/soc/omap/omap-hdmi.h
deleted file mode 100644
index 6ad2bf4..0000000
--- a/sound/soc/omap/omap-hdmi.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * omap-hdmi.h
- *
- * Definitions for OMAP ALSA SoC DAI driver for HDMI audio on OMAP4 processors.
- * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
- * Authors: Jorge Candelaria <jorge.candela...@ti.com>
- *          Ricardo Neri <ricardo.n...@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __OMAP_HDMI_H__
-#define __OMAP_HDMI_H__
-
-#define OMAP_HDMI_AUDIO_DMA_PORT 0x8c
-
-#define OMAP_HDMI_RATES        (SNDRV_PCM_RATE_32000 | \
-                               SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \
-                               SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | \
-                               SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000)
-
-#define OMAP_HDMI_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
-                               SNDRV_PCM_FMTBIT_S24_LE)
-
-#endif
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to