* Felipe Balbi <[email protected]> [141103 08:30]: > by adding labels to DWC3 nodes, it's far easier > for boards to reference them. > > Signed-off-by: Felipe Balbi <[email protected]>
Applying into omap-for-v3.19/dt, had to update it because of "ARM: dts: DRA7: Move USB_OTG 4 to dra74x.dtsi". Updated patch below. Regards, Tony 8< ------------------- From: Felipe Balbi <[email protected]> Date: Mon, 3 Nov 2014 10:28:42 -0600 Subject: [PATCH] arm: boot: dts: dra7: add labels to DWC3 nodes by adding labels to DWC3 nodes, it's far easier for boards to reference them. Signed-off-by: Felipe Balbi <[email protected]> [[email protected]: updated for otg 4 move to dra74x.dtsi] Signed-off-by: Tony Lindgren <[email protected]> --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1219,7 +1219,7 @@ }; }; - omap_dwc3_1@48880000 { + omap_dwc3_1: omap_dwc3_1@48880000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss1"; reg = <0x48880000 0x10000>; @@ -1240,7 +1240,7 @@ }; }; - omap_dwc3_2@488c0000 { + omap_dwc3_2: omap_dwc3_2@488c0000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss2"; reg = <0x488c0000 0x10000>; @@ -1262,7 +1262,7 @@ }; /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ - omap_dwc3_3@48900000 { + omap_dwc3_3: omap_dwc3_3@48900000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss3"; reg = <0x48900000 0x10000>; --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -46,7 +46,7 @@ }; ocp { - omap_dwc3_4@48940000 { + omap_dwc3_4: omap_dwc3_4@48940000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss4"; reg = <0x48940000 0x10000>; -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
