On Thu 2014-12-25 09:32:40, Pali Rohár wrote:
> On Wednesday 24 December 2014 23:57:38 Nishanth Menon wrote:
> > based on automated testing with u-boot as a chained
> > bootloader..
> >
> > v3.18: boots fine:
> > https://github.com/nmenon/kernel-test-logs/blob/v3.18/omap2plu
> > s_defconfig/n900.txt
> >
> > v3.19-rc1: hung
> > https://github.com/nmenon/kernel-test-logs/blob/v3.19-rc1/omap
> > 2plus_defconfig/n900.txt
> >
> > in the interim, my farm had a bit of breakdown around the time
> > of n900 breakdown..
> >
> > as per my last functional linux-next logs:
> > https://github.com/nmenon/kernel-test-logs/blob/next-20141204/
> > omap2plus_defconfig/n900.txt -> hung.
> > https://github.com/nmenon/kernel-test-logs/blob/next-20141112/
> > omap2plus_defconfig/n900.txt -> working.
> >
> > DEBUG_LL, CONFIG_DEBUG_OMAP3UART3=y and early_printk did not
> > yield information either
> >
> > Note: I am using the combined uImage+dtb image.[2]
> >
> > I think this might just be my setup..(i use chained loader ->
> > NOLO->u-boot->serial download->kernel) but anyways.. Since
> > Pali thought others might be interested in sharing
> > experience...
> >
> > [1] http://slexy.org/raw/s2osxhhwbR
> > [2]
> > https://github.com/nmenon/linux-2.6-playground/commit/177f5f71
> > b3f21ea484ee4b09a2e0c015de522417
>
> CCing other people.
>
> I see same problem in qemu with 3.19-rc1 kernel when doing DT
> boot. In qemu I'm using direct booting from OneNAND (X-Loader -->
> NOLO --> kernel) without U-Boot. After NOLO load & boot kernel I
> do not see any other output from serial console. Also on qemu
> screen there is no new output (just NOKIA logo from bootloader).
>
> I do not have this problem when doing legacy/board code boot with
> 3.19-rc1 kernel, so this problem is related to DT.
>
> Kernel 3.18-rc1 worked fine for both DT and legacy boot.
>
> Can somebody look what broke DT booting?
You should be able to apply this to get it back to boot.
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 53f3ca0..7c17d084 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -13,9 +13,16 @@
#include <dt-bindings/input/input.h>
/ {
- model = "Nokia N900";
+ model = "Nokia RX-51 board";
compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
+ aliases {
+ i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
+
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
@@ -26,7 +33,7 @@
compatible = "gpio-leds";
heartbeat {
label = "debug::sleep";
- gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */
+ gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */
linux,default-trigger = "default-on";
pinctrl-names = "default";
pinctrl-0 = <&debug_leds>;
@@ -140,14 +147,6 @@
>;
};
- ethernet_pins: pinmux_ethernet_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN |
MUX_MODE4) /* gpmc_ncs3.gpio_54 */
- OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4)
/* dss_data16.gpio_86 */
- OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)
/* uart3_rts_sd.gpio_164 */
- >;
- };
-
gpmc_pins: pinmux_gpmc_pins {
pinctrl-single,pins = <
@@ -307,7 +306,7 @@
regulator-name = "V28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on; /* due battery cover sensor */
+ regulator-always-on; /* due to battery cover sensor */
};
&vaux2 {
@@ -365,7 +364,6 @@
regulator-name = "VIO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
-
};
&vintana1 {
@@ -504,30 +502,6 @@
clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
- chan0 {
- chan-name = "lp5523:kb1";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- };
-
- chan1 {
- chan-name = "lp5523:kb2";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- };
-
- chan2 {
- chan-name = "lp5523:kb3";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- };
-
- chan3 {
- chan-name = "lp5523:kb4";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- };
-
chan4 {
chan-name = "lp5523:b";
led-cur = /bits/ 8 <50>;
@@ -545,18 +519,6 @@
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
};
-
- chan7 {
- chan-name = "lp5523:kb5";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- };
-
- chan8 {
- chan-name = "lp5523:kb6";
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- };
};
bq27200: bq27200@55 {
@@ -564,6 +526,7 @@
reg = <0x55>;
};
+ /* Stereo headphone amplifier */
tpa6130a2: tpa6130a2@60 {
compatible = "ti,tpa6130a2";
reg = <0x60>;
@@ -596,6 +559,22 @@
ti,usb-charger-detection = <&isp1704>;
};
+
+ adp1653: led-controller@30 {
+ compatible = "adi,adp1653";
+ reg = <0x30>;
+ gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
+
+ flash {
+ flash-timeout-microsec = <500000>;
+ flash-max-microamp = <320000>;
+ max-microamp = <50000>;
+ };
+
+ indicator {
+ max-microamp = <17500>;
+ };
+ };
};
&i2c3 {
@@ -603,6 +582,18 @@
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
+
+ /* bus 3, same as ad5820, et8ek8 */
+ /* bus 2, adp1653, smiapp */
+ ad5820: ad5820@c {
+ compatible = "adi,ad5820";
+ reg = <0x0c>;
+ };
+
+ et8ek8: et8ek8@3e {
+ compatible = "et,et8ek8";
+ reg = <0x3e>;
+ };
};
&mmc1 {
@@ -699,43 +690,6 @@
reg = <0x004c0000 0x0fb40000>;
};
};
-
- ethernet@gpmc {
- compatible = "smsc,lan91c94";
-
- status = "disabled";
-
- interrupt-parent = <&gpio2>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
- reg = <1 0x300 0xf>; /* 16 byte IO range at offset
0x300 */
- bank-width = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <ðernet_pins>;
- power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */
- reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */
- gpmc,device-width = <2>;
- gpmc,sync-clk-ps = <0>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <48>;
- gpmc,cs-wr-off-ns = <24>;
- gpmc,adv-on-ns = <0>;
- gpmc,adv-rd-off-ns = <0>;
- gpmc,adv-wr-off-ns = <0>;
- gpmc,we-on-ns = <12>;
- gpmc,we-off-ns = <18>;
- gpmc,oe-on-ns = <12>;
- gpmc,oe-off-ns = <48>;
- gpmc,page-burst-access-ns = <0>;
- gpmc,access-ns = <42>;
- gpmc,rd-cycle-ns = <180>;
- gpmc,wr-cycle-ns = <180>;
- gpmc,bus-turnaround-ns = <0>;
- gpmc,cycle2cycle-delay-ns = <0>;
- gpmc,wait-monitoring-ns = <0>;
- gpmc,clk-activation-ns = <0>;
- gpmc,wr-access-ns = <0>;
- gpmc,wr-data-mux-bus-ns = <12>;
- };
};
&mcspi1 {
@@ -823,9 +777,21 @@
};
&uart2 {
+ compatible = "brcm,uart,bcm2048";
interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
+
+ clocks = <&uart2_fck>, <&uart2_ick>;
+ clock-names = "fck", "ick";
+
+ device {
+ compatible = "brcm,bcm2048";
+ reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* 91 */
+ host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
+ bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
+ bt-sysclk = <2>;
+ };
};
&uart3 {
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
