With commit '7dedd34: ARM: OMAP2+: hwmod: Fix a crash in _setup_reset()
with DEBUG_LL' we moved from parsing cmdline to identify uart used
for earlycon to using the requsite hwmod CONFIG_DEBUG_OMAPxUARTy FLAGS.
On DRA7 UART3 hwmod doesn't have this flag enabled, and atleast on
BeagleBoard-X15, where we use UART3 for console, boot fails with
DEBUG_LL enabled. Enable DEBUG_OMAP4UART3_FLAGS for UART3 hwmod.
For using DEBUG_LL, enable CONFIG_DEBUG_OMAP4UART3 in menuconfig.
Fixes: 90020c7b2c5e ("ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data")
Cc: <[email protected]> # v3.12+
Reviewed-by: Felipe Balbi <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Signed-off-by: Lokesh Vutla <[email protected]>
---
Changes since v1:
- Updated $subject and patch description.
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index ffd6604..b6ea88f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -2017,7 +2017,7 @@ static struct omap_hwmod dra7xx_uart3_hwmod = {
.class = &dra7xx_uart_hwmod_class,
.clkdm_name = "l4per_clkdm",
.main_clk = "uart3_gfclk_mux",
- .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART3_FLAGS,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER_UART3_CLKCTRL_OFFSET,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
