Am 16.03.2015 um 22:20 schrieb Belisko Marek <marek.beli...@gmail.com>:
> On Mon, Mar 16, 2015 at 10:05 PM, Pavel Machek <pa...@ucw.cz> wrote: >> On Wed 2015-02-04 23:14:32, Marek Belisko wrote: >>> Signed-off-by: Marek Belisko <ma...@goldelico.com> >>> --- >>> .../bindings/power_supply/twl4030_madc_battery.txt | 43 >>> ++++++++++++++++++++++ >>> 1 file changed, 43 insertions(+) >>> create mode 100644 >>> Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt >>> >>> diff --git >>> a/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt >>> b/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt >>> new file mode 100644 >>> index 0000000..bb3580c >>> --- /dev/null >>> +++ >>> b/Documentation/devicetree/bindings/power_supply/twl4030_madc_battery.txt >>> @@ -0,0 +1,43 @@ >>> +twl4030_madc_battery >>> + >>> +Required properties: >>> + - compatible : "ti,twl4030-madc-battery" >>> + - capacity-uah : battery capacity in uAh >> >> Could we make it capacity-uAh ? > This name was suggested by Mark Rutland [1] and naming convention > should be all lowercase. There exists already bindings > without uppercase (e.g. ti,bb-uamp) so I would keep it consistent. >> >>> + - volt-to-capacity-charging-map : list of voltage(mV):level(%) values >>> + for charging calibration (see example) >>> + - volt-to-capacity-discharging-map : list of voltage(mV):level(%) values >>> + for discharging calibration (see example) >> >> Would "mV-to-capacity..." be more accurate? Also, would it make sense > Again maybe mv but it can be added also later. >> to introduce coefficients for temperature and discharge rate? > What do you mean? Nothing like that is used in current driver why do > we need to add it? Temperature calibration should have already been done in the underlaying twl4030 iio driver. Discharge rate is the real current flow reported in uA. Also reported by iio. >> >> Thanks, >> Pavel >> -- >> (english) http://www.livejournal.com/~pavelmachek >> (cesky, pictures) >> http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html > > [1] - http://lists.openwall.net/linux-kernel/2014/10/09/104 > > BR, > > marek > BR, Nikolaus -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
