On Wed, 25 Mar 2009 23:03:28 +0100 (CET)
Frans Meulenbroeks <[email protected]> wrote:
>
> This did not help me as the limit was already at 300000. However, I
> decided to raise the limit to 500000. Still no go so I also doubled the
> read limit from 100000 to 200000. After that the cards work without
> problem. Changing the write timing back to 300000 brought the problem back
> so apparently both timings need to be extended. Attached is the patch I
> used for this. As it is a timeout limit value, it should not harm anyone,
> and a longer timeout at least allows more cards to be used.
>
Unfortunately some controllers cannot cope with huge timeouts and will
complain. And such a huge timeout shouldn't be needed (and they weren't
any larger in .27).
>
> What somewhat troubles me is that this worked in .27, so it might be this
> patch does not address the root cause. Then again this is the best I can
> do. If someone has a better solution, I am more than happy to test it.
>
Indeed. Have you enabled MMC_DEBUG and checked that the controller
actually follows the configured timeouts?
Rgds
--
-- Pierre Ossman
Linux kernel, MMC maintainer http://www.kernel.org
rdesktop, core developer http://www.rdesktop.org
WARNING: This correspondence is being monitored by the
Swedish government. Make sure your server uses encryption
for SMTP traffic and consider using PGP for end-to-end
encryption.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
