* Russell King - ARM Linux <[email protected]> [150420 10:15]: > On Mon, Apr 20, 2015 at 09:25:16AM -0700, Tony Lindgren wrote: > > * Russell King - ARM Linux <[email protected]> [150420 08:50]: > > > Guys, > > > > > > If you're going to introduce a dependency on some infrastructure which > > > you absolutely require for booting, then _please_ ensure that the > > > configuration system is updated such that pre-existing kernel > > > configurations continue to work. > > > > > > Don't leave it such that the infrastructure ends up returning -ENOSYS, > > > which then filters down into your SoC specific code, and aborts the > > > initialisation of critical infrastructure, leaving you with a totally > > > silent boot failure. > > > > > > In this case, it's the addition of syscon to OMAP internals, > > > specifically in omap_control_init(). > > > > > > This is explicitly targetted at OMAP people, who have wasted much of > > > my day today investigating why their platforms no longer boot in DT > > > mode. > > > > Ouch, yeah missing dependencies are a pain to debug. > > > > Looks like we get MFD_SYSCON selected with omap2plus_defconfig, > > but that's not always the case like you pointed out. > > > > Does the patch below fix the issue for you? > > Yes, that fixes it, thanks.
OK let's get this merged immediately and then Tero can add some more checks to the init code like you suggested with a follow-up patch. Regards, Tony > > 8< ----------------------- > > From: Tony Lindgren <[email protected]> > > Date: Mon, 20 Apr 2015 09:23:25 -0700 > > Subject: [PATCH] ARM: OMAP2+: Fix booting with configs that don't have > > MFD_SYSCON > > > > With the recent changes omaps have developed a dependency to MFD_SYSCON. > > This is used for system control module generic register area and some > > clocks. > > > > We do have it selected in omap2plus_defconfig, but targeted config > > files may not have it selected. Let's make sure it's selected like > > few other ARM platforms are already doing. > > > > Reported-by: Russell King <[email protected]> > > Signed-off-by: Tony Lindgren <[email protected]> > > > > --- a/arch/arm/mach-omap2/Kconfig > > +++ b/arch/arm/mach-omap2/Kconfig > > @@ -81,6 +81,7 @@ config ARCH_OMAP2PLUS > > select GENERIC_IRQ_CHIP > > select MACH_OMAP_GENERIC > > select MEMORY > > + select MFD_SYSCON > > select OMAP_DM_TIMER > > select OMAP_GPMC > > select PINCTRL > > -- > FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up > according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
