Sakari Ailus <sakari.ai...@iki.fi> wrote on Fri [2015-Apr-24 22:49:33 +0300]: > Hi Benoit, > > On Fri, Apr 24, 2015 at 02:41:00PM -0500, Benoit Parrot wrote: > > Sakari Ailus <sakari.ai...@iki.fi> wrote on Thu [2015-Mar-26 00:57:36 > > +0200]: > > > Add lane-polarity property to endpoint nodes. This essentially tells that > > > the order of the differential signal wires is inverted. > > > > > > Signed-off-by: Sakari Ailus <sakari.ai...@iki.fi> > > > Acked-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com> > > > --- > > > Documentation/devicetree/bindings/media/video-interfaces.txt | 6 > > > ++++++ > > > 1 file changed, 6 insertions(+) > > > > > > diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt > > > b/Documentation/devicetree/bindings/media/video-interfaces.txt > > > index 571b4c6..9cd2a36 100644 > > > --- a/Documentation/devicetree/bindings/media/video-interfaces.txt > > > +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt > > > @@ -106,6 +106,12 @@ Optional endpoint properties > > > - link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for > > > instance, this is the actual frequency of the bus, not bits per clock > > > per > > > lane value. An array of 64-bit unsigned integers. > > > +- lane-polarities: an array of polarities of the lanes starting from the > > > clock > > > + lane and followed by the data lanes in the same order as in data-lanes. > > > + Valid values are 0 (normal) and 1 (inverted). The length of the array > > > + should be the combined length of data-lanes and clock-lanes properties. > > > + If the lane-polarities property is omitted, the value must be > > > interpreted > > > + as 0 (normal). This property is valid for serial busses only. > > > > > > > I am interested in this functionality. > > But I do have the following question. > > If the lane-polarities property is not specified, shouldn't the > > relevant struct member (bus->lane_polarities[i]) be set to 0? > > This is done in the caller function; endpoint->bus is zeroed in > v4l2_of_parse_endpoint(). I believe reading rest of the properties relies on > the same.
Dang, missed that. Sorry for the noise. > > -- > Kind regards, > > Sakari Ailus > e-mail: sakari.ai...@iki.fi XMPP: sai...@retiisi.org.uk -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
