Improve the DISPC debug print for scaling.
Signed-off-by: Tomi Valkeinen <[email protected]>
---
drivers/video/fbdev/omap2/dss/dispc.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/omap2/dss/dispc.c
b/drivers/video/fbdev/omap2/dss/dispc.c
index 646d94a71a79..f8c9115cdb4b 100644
--- a/drivers/video/fbdev/omap2/dss/dispc.c
+++ b/drivers/video/fbdev/omap2/dss/dispc.c
@@ -2418,6 +2418,9 @@ static int dispc_ovl_calc_scaling_44xx(unsigned long
pclk, unsigned long lclk,
return 0;
}
+#define DIV_FRAC(dividend, divisor) \
+ ((dividend) * 100 / (divisor) - ((dividend) / (divisor) * 100))
+
static int dispc_ovl_calc_scaling(unsigned long pclk, unsigned long lclk,
enum omap_overlay_caps caps,
const struct omap_video_timings *mgr_timings,
@@ -2477,8 +2480,19 @@ static int dispc_ovl_calc_scaling(unsigned long pclk,
unsigned long lclk,
if (ret)
return ret;
- DSSDBG("required core clk rate = %lu Hz\n", core_clk);
- DSSDBG("current core clk rate = %lu Hz\n", dispc_core_clk_rate());
+ DSSDBG("%dx%d -> %dx%d (%d.%02d x %d.%02d), decim %dx%d %dx%d (%d.%02d
x %d.%02d), taps %d, req clk %lu, cur clk %lu\n",
+ width, height,
+ out_width, out_height,
+ out_width / width, DIV_FRAC(out_width, width),
+ out_height / height, DIV_FRAC(out_height, height),
+
+ decim_x, decim_y,
+ width / decim_x, height / decim_y,
+ out_width / (width / decim_x), DIV_FRAC(out_width, width /
decim_x),
+ out_height / (height / decim_y), DIV_FRAC(out_height, height /
decim_y),
+
+ *five_taps ? 5 : 3,
+ core_clk, dispc_core_clk_rate());
if (!core_clk || core_clk > dispc_core_clk_rate()) {
DSSERR("failed to set up scaling, "
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
