Hi,
On Wednesday 24 June 2015 05:03 PM, Roger Quadros wrote:
> On Tue, 23 Jun 2015 17:28:51 +0530
> Kishon Vijay Abraham I <kis...@ti.com> wrote:
>
>> Deprecate using phy-omap-control driver to power on/off the PHY,
>> and use *syscon* framework to do the same. This handles
>> powering on/off the PHY for the USB2 PHYs used in various TI SoCs.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
>> ---
>> Documentation/devicetree/bindings/phy/ti-phy.txt | 6 +-
>> drivers/phy/phy-omap-usb2.c | 101
>> ++++++++++++++++++----
>> include/linux/phy/omap_usb.h | 18 ++++
>> 3 files changed, 107 insertions(+), 18 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt
>> b/Documentation/devicetree/bindings/phy/ti-phy.txt
>> index b9101b9..5bfe461 100644
>> --- a/Documentation/devicetree/bindings/phy/ti-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
>> @@ -42,10 +42,14 @@ Required properties:
>> * "wkupclk" - wakeup clock.
>> * "refclk" - reference clock (optional).
>>
>> -Optional properties:
>> +Deprecated properties:
>> - ctrl-module : phandle of the control module used by PHY driver to power
>> on
>> the PHY.
>>
>> +Recommended properies:
>> +- syscon-phy-power : phandle/offset pair. Phandle to the system control
>> + module and the register offset to power on/off the PHY.
>> +
>> This is usually a subnode of ocp2scp to which it is connected.
>>
>> usb2phy@4a0ad080 {
>> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
>> index 2f7220f..180b066 100644
>> --- a/drivers/phy/phy-omap-usb2.c
>> +++ b/drivers/phy/phy-omap-usb2.c
>> @@ -29,6 +29,8 @@
>> #include <linux/delay.h>
>> #include <linux/phy/omap_control_phy.h>
>> #include <linux/phy/phy.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> #include <linux/of_platform.h>
>>
>> #define USB2PHY_DISCON_BYP_LATCH (1 << 31)
>> @@ -97,22 +99,65 @@ static int omap_usb_set_peripheral(struct usb_otg *otg,
>> return 0;
>> }
>>
>> -static int omap_usb_power_off(struct phy *x)
>> +static int omap_usb_phy_power(struct omap_usb *phy, int on)
>> {
>> - struct omap_usb *phy = phy_get_drvdata(x);
>> + u32 val = 0;
>> + u32 mask;
>> + int ret;
>>
>> - omap_control_phy_power(phy->control_dev, 0);
>> + if (phy->syscon_phy_power) {
>> + switch (phy->type) {
>> + case TYPE_USB2:
>> + mask = OMAP_DEV_PHY_PD;
>> + if (!on)
>> + val = OMAP_DEV_PHY_PD;
>> + break;
>> + case TYPE_DRA7USB2:
>> + mask = OMAP_USB2_PHY_PD;
>> + if (!on)
>> + val = OMAP_USB2_PHY_PD;
>> + break;
>> + case TYPE_AM437USB2:
>> + mask = AM437X_USB2_PHY_PD |
>> + AM437X_USB2_OTG_PD |
>> + AM437X_USB2_OTGVDET_EN |
>> + AM437X_USB2_OTGSESSEND_EN;
>> + if (on) {
>> + val = AM437X_USB2_OTGVDET_EN |
>> + AM437X_USB2_OTGSESSEND_EN;
>> + } else {
>> + val = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD;
>> + }
>> + break;
>> + default:
>> + dev_err(phy->dev, "%s: type %d not recognized\n",
>> + __func__, phy->type);
>> + return -EINVAL;
>> + }
>> +
>> + ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
>> + mask, val);
>> + if (ret < 0)
>> + return ret;
>> + } else {
>> + omap_control_phy_power(phy->control_dev, on);
>> + }
>>
>> return 0;
>> }
>>
>> -static int omap_usb_power_on(struct phy *x)
>> +static int omap_usb_power_off(struct phy *x)
>> {
>> struct omap_usb *phy = phy_get_drvdata(x);
>>
>> - omap_control_phy_power(phy->control_dev, 1);
>> + return omap_usb_phy_power(phy, false);
>> +}
>>
>> - return 0;
>> +static int omap_usb_power_on(struct phy *x)
>> +{
>> + struct omap_usb *phy = phy_get_drvdata(x);
>> +
>> + return omap_usb_phy_power(phy, true);
>> }
>>
>> static int omap_usb_init(struct phy *x)
>> @@ -147,26 +192,31 @@ static struct phy_ops ops = {
>> static const struct usb_phy_data omap_usb2_data = {
>> .label = "omap_usb2",
>> .flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
>> + .type = TYPE_USB2,
>> };
>>
>> static const struct usb_phy_data omap5_usb2_data = {
>> .label = "omap5_usb2",
>> .flags = 0,
>> + .type = TYPE_USB2,
>> };
>>
>> static const struct usb_phy_data dra7x_usb2_data = {
>> .label = "dra7x_usb2",
>> .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
>> + .type = TYPE_USB2,
>> };
>>
>> static const struct usb_phy_data dra7x_usb2_phy2_data = {
>> .label = "dra7x_usb2_phy2",
>> .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
>> + .type = TYPE_DRA7USB2,
>> };
>>
>> static const struct usb_phy_data am437x_usb2_data = {
>> .label = "am437x_usb2",
>> .flags = 0,
>> + .type = TYPE_AM437USB2,
>> };
>>
>> static const struct of_device_id omap_usb2_id_table[] = {
>> @@ -223,6 +273,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
>> return -ENOMEM;
>>
>> phy->dev = &pdev->dev;
>> + phy->type = phy_data->type;
>>
>> phy->phy.dev = phy->dev;
>> phy->phy.label = phy_data->label;
>> @@ -237,20 +288,36 @@ static int omap_usb2_probe(struct platform_device
>> *pdev)
>> phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT;
>> }
>>
>> - control_node = of_parse_phandle(node, "ctrl-module", 0);
>> - if (!control_node) {
>> - dev_err(&pdev->dev, "Failed to get control device phandle\n");
>> - return -EINVAL;
>> - }
>> + phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
>> + "syscon-phy-power");
>> + if (IS_ERR(phy->syscon_phy_power)) {
>> + dev_info(&pdev->dev,
>> + "can't get syscon-phy-power, using control device\n");
>> + phy->syscon_phy_power = NULL;
>> +
>> + control_node = of_parse_phandle(node, "ctrl-module", 0);
>> + if (!control_node) {
>> + dev_err(&pdev->dev,
>> + "Failed to get control device phandle\n");
>> + return -EINVAL;
>> + }
>>
>> - control_pdev = of_find_device_by_node(control_node);
>> - if (!control_pdev) {
>> - dev_err(&pdev->dev, "Failed to get control device\n");
>> - return -EINVAL;
>> + control_pdev = of_find_device_by_node(control_node);
>> + if (!control_pdev) {
>> + dev_err(&pdev->dev, "Failed to get control device\n");
>> + return -EINVAL;
>> + }
>> + phy->control_dev = &control_pdev->dev;
>> + } else {
>> + if (of_property_read_u32_index(node,
>> + "syscon-phy-power", 1,
>> + &phy->power_reg)) {
>> + dev_err(&pdev->dev,
>> + "couldn't get power reg. offset\n");
>> + return -EINVAL;
>> + }
>> }
>>
>> - phy->control_dev = &control_pdev->dev;
>> -
>> otg->set_host = omap_usb_set_host;
>> otg->set_peripheral = omap_usb_set_peripheral;
>> if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
>> diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h
>> index dc2c541..de933ab 100644
>> --- a/include/linux/phy/omap_usb.h
>> +++ b/include/linux/phy/omap_usb.h
>> @@ -30,6 +30,12 @@ struct usb_dpll_params {
>> u32 mf;
>> };
>>
>> +enum omap_usb_phy_type {
>> + TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */
>> + TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
>> + TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
>> +};
>> +
>> struct omap_usb {
>> struct usb_phy phy;
>> struct phy_companion *comparator;
>> @@ -40,11 +46,15 @@ struct omap_usb {
>> struct clk *wkupclk;
>> struct clk *optclk;
>> u8 flags;
>> + enum omap_usb_phy_type type;
>> + struct regmap *syscon_phy_power; /* ctrl. reg. acces */
>> + unsigned int power_reg; /* power reg. index within syscon */
>> };
>>
>> struct usb_phy_data {
>> const char *label;
>> u8 flags;
>> + enum omap_usb_phy_type type;
>> };
>>
>> /* Driver Flags */
>> @@ -52,6 +62,14 @@ struct usb_phy_data {
>> #define OMAP_USB2_HAS_SET_VBUS (1 << 1)
>> #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT (1 << 2)
>>
>> +#define OMAP_DEV_PHY_PD BIT(0)
>> +#define OMAP_USB2_PHY_PD BIT(28)
>> +
>> +#define AM437X_USB2_PHY_PD BIT(0)
>
> This PD bit can be set in usb_phy_data and used by
> a single block of code for all 3 phys.
yeah, that could be done.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
