>> From: linux-omap-ow...@vger.kernel.org >> [mailto:linux-omap-ow...@vger.kernel.org] On Behalf Of twebb >> Sent: Wednesday, April 15, 2009 9:35 PM >> To: linux-omap@vger.kernel.org Mailing List >> Subject: ehci problem on OMAP35xx >> >> I'm having issues getting USB up and going on HSUSB2/EHCI on >> OMAP35xx-based hardware (very similar to beagle board). We're using >> an SMSC3317 connected to HSUSB2, and in turn, the 3317 is connected to
Does SMSC3317 support Input clocking mode for the 60Mhz ULPI clk? >> an onboard hub - a SMSC USB2513. When the hub is removed from reset, >> it appears that handshaking/chirping starts to happen between xcvr and >> hub, but ends with the code announcing that it is "unable to enumerate >> USB device on port 2". I'm guessing it's failing because we never see >> PED set in the PORTSC_1 reg (and we are seeing PO=1 which doesn't make >> any sense). -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
