Hi Sascha,
Sascha Hauer <s.ha...@pengutronix.de> writes:
> The thermal code uses int, long and unsigned long for temperatures
> in different places.
>
> Using an unsigned type limits the thermal framework to positive
> temperatures without need. Also several drivers currently will report
> temperatures near UINT_MAX for temperatures below 0°C. This will probably
> immediately shut the machine down due to overtemperature if started below
> 0°C.
>
> 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC
> is above the melting point of all known materials.
>
> Consistently use a plain 'int' for temperatures throughout the thermal code
> and
> the drivers. This only changes the places in the drivers where the temperature
> is passed around as pointer, when drivers internally use another type this is
> not changed.
>
> Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
> Acked-by: Geert Uytterhoeven <geert+rene...@glider.be>
> Reviewed-by: Jean Delvare <jdelv...@suse.de>
> Reviewed-by: Lukasz Majewski <l.majew...@samsung.com>
> Reviewed-by: Darren Hart <dvh...@linux.intel.com>
> Reviewed-by: Heiko Stuebner <he...@sntech.de>
> Reviewed-by: Peter Feuerer <pe...@piie.net>
> Cc: Punit Agrawal <punit.agra...@arm.com>
The changes below look good.
For the power_allocator governor and corresponding trace events,
Reviewed-by: Punit Agrawal <punit.agra...@arm.com>
Thanks
> Cc: Zhang Rui <rui.zh...@intel.com>
> Cc: Eduardo Valentin <edubez...@gmail.com>
> Cc: linux...@vger.kernel.org
> Cc: linux-ker...@vger.kernel.org
> Cc: Jean Delvare <jdelv...@suse.de>
> Cc: Peter Feuerer <pe...@piie.net>
> Cc: Heiko Stuebner <he...@sntech.de>
> Cc: Lukasz Majewski <l.majew...@samsung.com>
> Cc: Stephen Warren <swar...@wwwdotorg.org>
> Cc: Thierry Reding <thierry.red...@gmail.com>
> Cc: linux-a...@vger.kernel.org
> Cc: platform-driver-...@vger.kernel.org
> Cc: linux-arm-ker...@lists.infradead.org
> Cc: linux-omap@vger.kernel.org
> Cc: linux-samsung-...@vger.kernel.org
> Cc: Guenter Roeck <li...@roeck-us.net>
> Cc: Rafael J. Wysocki <r...@rjwysocki.net>
> Cc: Maxime Ripard <maxime.rip...@free-electrons.com>
> Cc: Darren Hart <dvh...@infradead.org>
> Cc: lm-sens...@lm-sensors.org
> ---
>
> changes since v1:
> - Add missing pieces for power_allocator driver
>
> drivers/acpi/thermal.c | 12 +++++-----
> drivers/hwmon/lm75.c | 2 +-
> drivers/hwmon/ntc_thermistor.c | 2 +-
> drivers/hwmon/tmp102.c | 2 +-
> drivers/input/touchscreen/sun4i-ts.c | 8 +++----
> drivers/platform/x86/acerhdf.c | 9 ++++----
> drivers/platform/x86/intel_mid_thermal.c | 9 ++++----
> drivers/power/power_supply_core.c | 2 +-
> drivers/thermal/armada_thermal.c | 2 +-
> drivers/thermal/db8500_thermal.c | 7 +++---
> drivers/thermal/dove_thermal.c | 2 +-
> drivers/thermal/fair_share.c | 2 +-
> drivers/thermal/gov_bang_bang.c | 5 ++--
> drivers/thermal/hisi_thermal.c | 4 ++--
> drivers/thermal/imx_thermal.c | 27
> +++++++++++-----------
> drivers/thermal/int340x_thermal/int3400_thermal.c | 2 +-
> .../thermal/int340x_thermal/int340x_thermal_zone.c | 10 ++++----
> .../thermal/int340x_thermal/int340x_thermal_zone.h | 8 +++----
> .../int340x_thermal/processor_thermal_device.c | 4 ++--
> drivers/thermal/intel_quark_dts_thermal.c | 13 +++++------
> drivers/thermal/intel_soc_dts_iosf.c | 8 +++----
> drivers/thermal/kirkwood_thermal.c | 2 +-
> drivers/thermal/of-thermal.c | 14 +++++------
> drivers/thermal/power_allocator.c | 16 ++++++-------
> drivers/thermal/qcom-spmi-temp-alarm.c | 2 +-
> drivers/thermal/rcar_thermal.c | 7 +++---
> drivers/thermal/rockchip_thermal.c | 10 ++++----
> drivers/thermal/samsung/exynos_tmu.c | 23 +++++++++---------
> drivers/thermal/spear_thermal.c | 2 +-
> drivers/thermal/st/st_thermal.c | 5 ++--
> drivers/thermal/step_wise.c | 4 ++--
> drivers/thermal/tegra_soctherm.c | 4 ++--
> drivers/thermal/thermal_core.c | 26 ++++++++++-----------
> drivers/thermal/thermal_hwmon.c | 10 ++++----
> drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 10 ++++----
> drivers/thermal/x86_pkg_temp_thermal.c | 10 ++++----
> include/linux/thermal.h | 26 +++++++++------------
> include/trace/events/thermal_power_allocator.h | 6 ++---
> 38 files changed, 151 insertions(+), 166 deletions(-)
>
[...]
> diff --git a/drivers/thermal/power_allocator.c
> b/drivers/thermal/power_allocator.c
> index 4672250..045aea59 100644
> --- a/drivers/thermal/power_allocator.c
> +++ b/drivers/thermal/power_allocator.c
> @@ -92,8 +92,8 @@ struct power_allocator_params {
> * Return: The power budget for the next period.
> */
> static u32 pid_controller(struct thermal_zone_device *tz,
> - unsigned long current_temp,
> - unsigned long control_temp,
> + int current_temp,
> + int control_temp,
> u32 max_allocatable_power)
> {
> s64 p, i, d, power_range;
> @@ -102,7 +102,7 @@ static u32 pid_controller(struct thermal_zone_device *tz,
>
> max_power_frac = int_to_frac(max_allocatable_power);
>
> - err = ((s32)control_temp - (s32)current_temp);
> + err = control_temp - current_temp;
> err = int_to_frac(err);
>
> /* Calculate the proportional term */
> @@ -223,8 +223,8 @@ static void divvy_up_power(u32 *req_power, u32
> *max_power, int num_actors,
> }
>
> static int allocate_power(struct thermal_zone_device *tz,
> - unsigned long current_temp,
> - unsigned long control_temp)
> + int current_temp,
> + int control_temp)
> {
> struct thermal_instance *instance;
> struct power_allocator_params *params = tz->governor_data;
> @@ -326,7 +326,7 @@ static int allocate_power(struct thermal_zone_device *tz,
> granted_power, total_granted_power,
> num_actors, power_range,
> max_allocatable_power, current_temp,
> - (s32)control_temp - (s32)current_temp);
> + control_temp - current_temp);
>
> devm_kfree(&tz->device, req_power);
> unlock:
> @@ -411,7 +411,7 @@ static int power_allocator_bind(struct
> thermal_zone_device *tz)
> {
> int ret;
> struct power_allocator_params *params;
> - unsigned long switch_on_temp, control_temp;
> + int switch_on_temp, control_temp;
> u32 temperature_threshold;
>
> if (!tz->tzp || !tz->tzp->sustainable_power) {
> @@ -476,7 +476,7 @@ static void power_allocator_unbind(struct
> thermal_zone_device *tz)
> static int power_allocator_throttle(struct thermal_zone_device *tz, int trip)
> {
> int ret;
> - unsigned long switch_on_temp, control_temp, current_temp;
> + int switch_on_temp, control_temp, current_temp;
> struct power_allocator_params *params = tz->governor_data;
>
> /*
[...]
> diff --git a/include/trace/events/thermal_power_allocator.h
> b/include/trace/events/thermal_power_allocator.h
> index 12e1321..5afae8f 100644
> --- a/include/trace/events/thermal_power_allocator.h
> +++ b/include/trace/events/thermal_power_allocator.h
> @@ -11,7 +11,7 @@ TRACE_EVENT(thermal_power_allocator,
> u32 total_req_power, u32 *granted_power,
> u32 total_granted_power, size_t num_actors,
> u32 power_range, u32 max_allocatable_power,
> - unsigned long current_temp, s32 delta_temp),
> + int current_temp, s32 delta_temp),
> TP_ARGS(tz, req_power, total_req_power, granted_power,
> total_granted_power, num_actors, power_range,
> max_allocatable_power, current_temp, delta_temp),
> @@ -24,7 +24,7 @@ TRACE_EVENT(thermal_power_allocator,
> __field(size_t, num_actors )
> __field(u32, power_range )
> __field(u32, max_allocatable_power )
> - __field(unsigned long, current_temp )
> + __field(int, current_temp )
> __field(s32, delta_temp )
> ),
> TP_fast_assign(
> @@ -42,7 +42,7 @@ TRACE_EVENT(thermal_power_allocator,
> __entry->delta_temp = delta_temp;
> ),
>
> - TP_printk("thermal_zone_id=%d req_power={%s} total_req_power=%u
> granted_power={%s} total_granted_power=%u power_range=%u
> max_allocatable_power=%u current_temperature=%lu delta_temperature=%d",
> + TP_printk("thermal_zone_id=%d req_power={%s} total_req_power=%u
> granted_power={%s} total_granted_power=%u power_range=%u
> max_allocatable_power=%u current_temperature=%d delta_temperature=%d",
> __entry->tz_id,
> __print_array(__get_dynamic_array(req_power),
> __entry->num_actors, 4),
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
