On Thu, Aug 6, 2015 at 4:21 PM, Felipe Balbi <[email protected]> wrote:
> HI,
>
> On Thu, Aug 06, 2015 at 09:40:26AM +0200, Yegor Yefremov wrote:
>> I performed a stress test with several FT4232H chips connected to a
>
> how many ?
# lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M
|__ Port 1: Dev 2, If 0, Class=, Driver=hub/4p, 480M
|__ Port 1: Dev 3, If 0, Class=, Driver=ftdi_sio, 480M
|__ Port 1: Dev 3, If 1, Class=, Driver=ftdi_sio, 480M
|__ Port 1: Dev 3, If 2, Class=, Driver=ftdi_sio, 480M
|__ Port 1: Dev 3, If 3, Class=, Driver=ftdi_sio, 480M
|__ Port 2: Dev 4, If 0, Class=, Driver=ftdi_sio, 480M
|__ Port 2: Dev 4, If 1, Class=, Driver=ftdi_sio, 480M
|__ Port 2: Dev 4, If 2, Class=, Driver=ftdi_sio, 480M
|__ Port 2: Dev 4, If 3, Class=, Driver=ftdi_sio, 480M
|__ Port 3: Dev 5, If 0, Class=, Driver=ftdi_sio, 480M
|__ Port 3: Dev 5, If 1, Class=, Driver=ftdi_sio, 480M
|__ Port 3: Dev 5, If 2, Class=, Driver=ftdi_sio, 480M
|__ Port 3: Dev 5, If 3, Class=, Driver=ftdi_sio, 480M
3 chips a 4-ports are attached.
>> hub, that is attached to one of the musb ports. So far the test was
>> successful for several hours. But I've seen following warnings:
>>
>> musb_host_rx 1973: Rx interrupt with no errors or packet!
>> musb_ep_program 931: broken !rx_reinit, ep5 csr 0203
>> musb_host_rx 1973: Rx interrupt with no errors or packet!
>> musb_host_rx 1973: Rx interrupt with no errors or packet!
>> musb_host_rx 1973: Rx interrupt with no errors or packet!
>> musb_host_rx 1973: Rx interrupt with no errors or packet!
>> musb_ep_program 931: broken !rx_reinit, ep5 csr 0003
>> musb_host_rx 1973: Rx interrupt with no errors or packet!
>> musb_ep_program 931: broken !rx_reinit, ep7 csr 0003
>>
>> Is this expected behavior?
>
> no, that shouldn't happen, but it does and, apparently, in more than one
> implementation. Wondering if you're running into endpoint limitation due
> to MUSB's poor transfer scheduling for non-bulk endpoints.
>
> --
> balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
