On Friday 14 August 2015 02:03 PM, Alexandre Belloni wrote:
On 13/08/2015 at 12:37:48 +0530, Keerthy wrote :
Configure the clock source to either internal clock
or external clock based on the availability of the clocks.
External clock is preferred as it can be ticking during suspend.

Signed-off-by: Keerthy <[email protected]>
---
  drivers/rtc/rtc-omap.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
  1 file changed, 44 insertions(+)

diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index 8b6355f..479f730 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -25,6 +25,7 @@
  #include <linux/of_device.h>
  #include <linux/pm_runtime.h>
  #include <linux/io.h>
+#include <linux/clk.h>

  /*
   * The OMAP RTC is a year/month/day/hours/minutes/seconds BCD clock
@@ -107,6 +108,7 @@

  /* OMAP_RTC_OSC_REG bit fields: */
  #define OMAP_RTC_OSC_32KCLK_EN                BIT(6)
+#define OMAP_RTC_OSC_SEL_32KCLK_SRC    BIT(3)

  /* OMAP_RTC_IRQWAKEEN bit fields: */
  #define OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN       BIT(1)
@@ -136,6 +138,7 @@ struct omap_rtc {
        int irq_timer;
        u8 interrupts_reg;
        bool is_pmic_controller;
+       bool has_ext_clk;
        const struct omap_rtc_device_type *type;
  };

@@ -525,6 +528,7 @@ static int omap_rtc_probe(struct platform_device *pdev)
  {
        struct omap_rtc *rtc;
        struct resource *res;
+       struct clk *ext_clk, *int_clk;
        u8 reg, mask, new_ctrl;
        const struct platform_device_id *id_entry;
        const struct of_device_id *of_id;
@@ -553,6 +557,17 @@ static int omap_rtc_probe(struct platform_device *pdev)
        if (rtc->irq_alarm <= 0)
                return -ENOENT;

+       ext_clk = devm_clk_get(&pdev->dev, "ext-clk");
+       if (!IS_ERR(ext_clk)) {
+               rtc->has_ext_clk = true;
+               clk_prepare(ext_clk);

I'd say this has to be prepare_enable because you are not enabling those
clocks anywhere

+       } else {
+               int_clk = devm_clk_get(&pdev->dev, "int-clk");
+
+               if (!IS_ERR(int_clk))
+                       clk_prepare(int_clk);
+       }
+
        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        rtc->base = devm_ioremap_resource(&pdev->dev, res);
        if (IS_ERR(rtc->base))
@@ -627,6 +642,17 @@ static int omap_rtc_probe(struct platform_device *pdev)
        if (reg != new_ctrl)
                rtc_write(rtc, OMAP_RTC_CTRL_REG, new_ctrl);

+       /*
+        * If we have the external clock then
+        * Switch to external clock so we can keep ticking
+        * acorss suspend
+        */
+       if (rtc->has_ext_clk) {
+               reg = rtc_read(rtc, OMAP_RTC_OSC_REG);
+               rtc_write(rtc, OMAP_RTC_OSC_REG, reg |
+                         OMAP_RTC_OSC_SEL_32KCLK_SRC);
+       }
+
        rtc->type->lock(rtc);

        device_init_wakeup(&pdev->dev, true);
@@ -672,6 +698,8 @@ err:
  static int __exit omap_rtc_remove(struct platform_device *pdev)
  {
        struct omap_rtc *rtc = platform_get_drvdata(pdev);
+       struct clk *ext_clk, *int_clk;
+       u8 reg;

        if (pm_power_off == omap_rtc_power_off &&
                        omap_rtc_power_off_rtc == rtc) {
@@ -681,10 +709,26 @@ static int __exit omap_rtc_remove(struct platform_device 
*pdev)

        device_init_wakeup(&pdev->dev, 0);

+       ext_clk = devm_clk_get(&pdev->dev, "ext-clk");
+       if (!IS_ERR(ext_clk)) {
+               clk_unprepare(ext_clk);
+       } else {
+               int_clk = devm_clk_get(&pdev->dev, "int-clk");
+
+               if (!IS_ERR(int_clk))
+                       clk_unprepare(int_clk);
+       }
+

You can probably add ext_clk and int_clk to struct omap_rtc and avoid
those devm_clk_get.



Since both int_clk and ext_clk are mutual exclusive, you can have only one variable.


Thanks,
Vaibhav
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to