The i2c5 pinctrl offsets are wrong. If the bootloader doesn't set the
pins up, communication with tca6424a doesn't work (controller timeouts)
and it is not possible to enable HDMI.
Fixes: 9be495c42609 ("ARM: dts: omap5-evm: Add I2c pinctrl data")
Signed-off-by: Grazvydas Ignotas <[email protected]>
---
arch/arm/boot/dts/omap5-uevm.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 3cc8f35..3cb030f 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -174,8 +174,8 @@
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
- 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
- 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
+ 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
+ 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
>;
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
