Add reset data for pruss, gfx, wkup-m3 and system reset.
Signed-off-by: Tero Kristo <t-kri...@ti.com>
---
arch/arm/boot/dts/am4372.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 0447c04a..fcc8d31 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -116,12 +116,15 @@
reg-names = "umem", "dmem";
ti,hwmods = "wkup_m3";
ti,pm-firmware = "am335x-pm-firmware.elf";
+ reset-names = "wkup_m3";
+ resets = <&prcm 0x2000 0x10 3 0x14 5>;
};
prcm: prcm@1f0000 {
compatible = "ti,am4-prcm";
reg = <0x1f0000 0x11000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <5>;
prcm_clocks: clocks {
#address-cells = <1>;
@@ -130,6 +133,12 @@
prcm_clockdomains: clockdomains {
};
+
+ system_reset: system_reset {
+ compatible = "ti,system-reset";
+ reset-names = "system";
+ reset-cells = <&prcm 0x4000 0 0 4 0>;
+ };
};
scm: scm@210000 {
@@ -1053,6 +1062,21 @@
ti,hwmods = "vpfe1";
status = "disabled";
};
+
+ gfx: gfx@56000000 {
+ compatible = "ti,am4376-sgx530", "img,sgx530";
+ ti,hwmods = "gfx";
+ status = "disabled";
+ reset-names = "gfx";
+ resets = <&prcm 0x400 0x10 0 0x14 0>;
+ };
+
+ pruss: pruss@54400000 {
+ compatible = "ti,am4372-pruss";
+ ti,hwmods = "pruss";
+ reset-names = "pruss";
+ resets = <&prcm 0x800 0x10 1 0x14 0>;
+ };
};
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
