As per mmc device tree binding documentation card detect gpio has
to be active low signal. When a hardware is designed with active
high card detect, gpio polarity has to be changed with
cd-inverted dt property.
In AM43xx the card detect gpio is designed as active low gpio.
So correcting the dt card detect gpio definition.
Signed-off-by: Mugunthan V N <mugunthan...@ti.com>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 2 +-
arch/arm/boot/dts/am437x-idk-evm.dts | 2 +-
arch/arm/boot/dts/am437x-sk-evm.dts | 2 +-
arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts
b/arch/arm/boot/dts/am437x-gp-evm.dts
index 22038f2..81de3a1 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -689,7 +689,7 @@
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
/* eMMC sits on mmc2 */
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts
b/arch/arm/boot/dts/am437x-idk-evm.dts
index af25801..337fb91 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -325,7 +325,7 @@
pinctrl-1 = <&mmc1_pins_sleep>;
vmmc-supply = <&v3_3d>;
bus-width = <4>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&qspi {
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts
b/arch/arm/boot/dts/am437x-sk-evm.dts
index 7da7c2d..1582fdb 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -563,7 +563,7 @@
vmmc-supply = <&dcdc4>;
bus-width = <4>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&usb2_phy1 {
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts
b/arch/arm/boot/dts/am43x-epos-evm.dts
index 86c2dfb..47954ed 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -376,7 +376,7 @@
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&mac {
--
2.6.1.133.gf5b6079
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
