Hi Jassi, On 10/20/2015 11:44 PM, Jassi Brar wrote: > On Wed, Sep 23, 2015 at 5:44 AM, Dave Gerlach <d-gerl...@ti.com> wrote: >> The mailbox framework controls the transmission queue and requires >> either its controller implementations or clients to run the state >> machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready >> interrupt as the equivalent of a Tx-done interrupt to run this Tx >> queue state-machine. >> >> The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload >> certain PM tasks, like doing the necessary operations for Device >> PM suspend/resume or for entering lower c-states during cpuidle. >> >> The CPUIdle on AM33xx requires the messages to be sent without >> having to trigger the Tx-ready interrupts, as the interrupt >> would immediately terminate the CPUIdle operation. Support for >> this has been added by introducing a DT quirk, "ti,mbox-send-noirq" >> and using it to modify the normal OMAP mailbox controller behavior >> on the sub-mailboxes used to communicate with the WkupM3 remote >> processor. This also requires the wkup_m3_ipc driver to adjust >> its mailbox usage logic to run the Tx state machine. >> > Probably Suman already updated you on what was discussed about this > patch at Connect-SFO. My suggestion was to drive TX poll-based (I > know, I know...) because the "interrupt-driven" is just an impression, > it is not really. You get the interrupt as soon as you enable it > because it is the "FIFO not-full" interrupt which is always because > there is always space left after writing to the fifo. The cons are > that it buffers messages hidden from the client while abusing the irq. > If you guys could break away from the "interrupt-driven" illusion and > use polling which it actually is, everything falls into place and you > avoid the "ti,mbox-send-noirq" quirk.
Looking at this closely, even with that approach, we would still need a quirk to deal with the weird behavior of our wakeup m3. Essentially we have two independent things: 1. Tx state machine (currently interrupt driven) for ticking the mailbox core tx state machine. 2. A quirk that we need for dealing with Wakeup M3 behavior, MPU needs to take out the message on behalf of WkupM3 processor after transmission and clearing the IP-level interrupt intended for WkupM3. This will be irrespective of the Tx state machine choice, and this needs to be different only on the specific mbox channel used to talk with WkupM3 processor. Previously, we were doing #2 in the OMAP mailbox regular interrupt handler (handles both Rx and Tx interrupts) as part of the Rx interrupt handler with the rx mbox variables reflecting those of the WkupM3 processor. But when we remove the interrupt processing, we now actually need to add code to deal with this. > Anyways I am OK too, if you guys want to fix it with a platform > specific quirk. Let me know I'll pick this patch. I haven't gotten a chance to try #1, and I won't be able to look at it atleast for another month. I suggest that you go ahead and pick this patch up, as a quirk is needed in one form or the other for #2, and #1 is anyways a bigger change that will affect all our IPC stacks across all pairs of MPU - remote processors on different SoCs. regards Suman -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
