Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.
Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 05b1c1ebded8..60b3fbb3bf07 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -40,8 +40,8 @@
&omap5_pmx_core {
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
- 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
- 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
+ OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)
/* i2c5_scl */
+ OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0)
/* i2c5_sda */
>;
};
};
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
