Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---

 arch/arm/boot/dts/am335x-pepper.dts | 200 ++++++++++++++++++------------------
 1 file changed, 100 insertions(+), 100 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-pepper.dts 
b/arch/arm/boot/dts/am335x-pepper.dts
index 7106114c7464..f9d7239ebdaf 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -93,14 +93,14 @@
 &am33xx_pinmux {
        i2c0_pins: pinmux_i2c0 {
                pinctrl-single,pins = <
-                       0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* 
i2c0_sda.i2c0_sda */
-                       0x18c (PIN_INPUT_PULLUP | MUX_MODE0)    /* 
i2c0_scl.i2c0_scl */
+                       AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)       
/* i2c0_sda.i2c0_sda */
+                       AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)       
/* i2c0_scl.i2c0_scl */
                >;
        };
        i2c1_pins: pinmux_i2c1 {
                pinctrl-single,pins = <
-                       0x10C (PIN_INPUT_PULLUP | MUX_MODE3)    /* 
mii1_crs,i2c1_sda */
-                       0x110 (PIN_INPUT_PULLUP | MUX_MODE3)    /* 
mii1_rxerr,i2c1_scl */
+                       AM33XX_IOPAD(0x90C, PIN_INPUT_PULLUP | MUX_MODE3)       
/* mii1_crs,i2c1_sda */
+                       AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE3)       
/* mii1_rxerr,i2c1_scl */
                >;
        };
 };
@@ -130,7 +130,7 @@
 &am33xx_pinmux {
        accel_pins: pinmux_accel {
                pinctrl-single,pins = <
-                       0x98 (PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
+                       AM33XX_IOPAD(0x898, PIN_INPUT | MUX_MODE7)   /* 
gpmc_wen.gpio2_4 */
                >;
        };
 };
@@ -177,12 +177,12 @@
 &am33xx_pinmux {
        audio_pins: pinmux_audio {
                pinctrl-single,pins = <
-                       0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* 
mcasp0_ahcklx.mcasp0_ahclkx */
-                       0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* 
mcasp0_fsx.mcasp0_fsx */
-                       0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* 
mcasp0_aclkx.mcasp0_aclkx */
-                       0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* 
mcasp0_axr0.mcasp0_axr0 */
-                       0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* 
mcasp0_axr1.mcasp0_axr1 */
-                       0x40 (PIN_OUTPUT | MUX_MODE7)   /* gpmc_a0.gpio1_16 */
+                       AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)     
/* mcasp0_ahcklx.mcasp0_ahclkx */
+                       AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)     
/* mcasp0_fsx.mcasp0_fsx */
+                       AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)     
/* mcasp0_aclkx.mcasp0_aclkx */
+                       AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)     
/* mcasp0_axr0.mcasp0_axr0 */
+                       AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE0)     
/* mcasp0_axr1.mcasp0_axr1 */
+                       AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)     /* 
gpmc_a0.gpio1_16 */
                >;
        };
 };
@@ -228,36 +228,36 @@
 &am33xx_pinmux {
        lcd_pins: pinmux_lcd {
                pinctrl-single,pins = <
-                       0xa0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data0.lcd_data0 
*/
-                       0xa4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data1.lcd_data1 
*/
-                       0xa8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data2.lcd_data2 
*/
-                       0xac (PIN_OUTPUT | MUX_MODE0)   /* lcd_data3.lcd_data3 
*/
-                       0xb0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data4.lcd_data4 
*/
-                       0xb4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data5.lcd_data5 
*/
-                       0xb8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data6.lcd_data6 
*/
-                       0xbc (PIN_OUTPUT | MUX_MODE0)   /* lcd_data7.lcd_data7 
*/
-                       0xc0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data8.lcd_data8 
*/
-                       0xc4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data9.lcd_data9 
*/
-                       0xc8 (PIN_OUTPUT | MUX_MODE0)   /* 
lcd_data10.lcd_data10 */
-                       0xcc (PIN_OUTPUT | MUX_MODE0)   /* 
lcd_data11.lcd_data11 */
-                       0xd0 (PIN_OUTPUT | MUX_MODE0)   /* 
lcd_data12.lcd_data12 */
-                       0xd4 (PIN_OUTPUT | MUX_MODE0)   /* 
lcd_data13.lcd_data13 */
-                       0xd8 (PIN_OUTPUT | MUX_MODE0)   /* 
lcd_data14.lcd_data14 */
-                       0xdc (PIN_OUTPUT | MUX_MODE0)   /* 
lcd_data15.lcd_data15 */
-                       0x20 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad8.lcd_data16 
*/
-                       0x24 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad9.lcd_data17 
*/
-                       0x28 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad10.lcd_data18 
*/
-                       0x2c (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad11.lcd_data19 
*/
-                       0x30 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad12.lcd_data20 
*/
-                       0x34 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad13.lcd_data21 
*/
-                       0x38 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad14.lcd_data22 
*/
-                       0x3c (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad15.lcd_data23 
*/
-                       0xe0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_vsync.lcd_vsync 
*/
-                       0xe4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_hsync.lcd_hsync 
*/
-                       0xe8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_pclk.lcd_pclk */
-                       0xec (PIN_OUTPUT | MUX_MODE0)   /* 
lcd_ac_bias_en.lcd_ac_bias_en */
+                       AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data0.lcd_data0 */
+                       AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data1.lcd_data1 */
+                       AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data2.lcd_data2 */
+                       AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data3.lcd_data3 */
+                       AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data4.lcd_data4 */
+                       AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data5.lcd_data5 */
+                       AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data6.lcd_data6 */
+                       AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data7.lcd_data7 */
+                       AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data8.lcd_data8 */
+                       AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data9.lcd_data9 */
+                       AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data10.lcd_data10 */
+                       AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data11.lcd_data11 */
+                       AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data12.lcd_data12 */
+                       AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data13.lcd_data13 */
+                       AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data14.lcd_data14 */
+                       AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_data15.lcd_data15 */
+                       AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)     /* 
gpmc_ad8.lcd_data16 */
+                       AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)     /* 
gpmc_ad9.lcd_data17 */
+                       AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)     /* 
gpmc_ad10.lcd_data18 */
+                       AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)     /* 
gpmc_ad11.lcd_data19 */
+                       AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)     /* 
gpmc_ad12.lcd_data20 */
+                       AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)     /* 
gpmc_ad13.lcd_data21 */
+                       AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)     /* 
gpmc_ad14.lcd_data22 */
+                       AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)     /* 
gpmc_ad15.lcd_data23 */
+                       AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_vsync.lcd_vsync */
+                       AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_hsync.lcd_hsync */
+                       AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_pclk.lcd_pclk */
+                       AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)     /* 
lcd_ac_bias_en.lcd_ac_bias_en */
                        /* Display Enable */
-                       0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* 
gpmc_a11.gpio1_27 */
+                       AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLUP | MUX_MODE7)      
/* gpmc_a11.gpio1_27 */
                >;
        };
 };
@@ -291,29 +291,29 @@
 &am33xx_pinmux {
        ethernet_pins: pinmux_ethernet {
                pinctrl-single,pins = <
-                       0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* 
mii1_txen.rgmii1_tctl */
-                       0x118 (PIN_INPUT_PULLUP | MUX_MODE2)    /* 
mii1_rxdv.rgmii1_rctl */
-                       0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* 
mii1_txd3.rgmii1_td3 */
-                       0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* 
mii1_txd2.rgmii1_td2 */
-                       0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* 
mii1_txd1.rgmii1_td1 */
-                       0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* 
mii1_txd0.rgmii1_td0 */
-                       0x12c (PIN_INPUT_PULLUP | MUX_MODE2)    /* 
mii1_txclk.rgmii1_tclk */
-                       0x130 (PIN_INPUT_PULLUP | MUX_MODE2)    /* 
mii1_rxclk.rgmii1_rclk */
-                       0x134 (PIN_INPUT_PULLUP | MUX_MODE2)    /* 
mii1_rxd3.rgmii1_rxd3 */
-                       0x138 (PIN_INPUT_PULLUP | MUX_MODE2)    /* 
mii1_rxd2.rgmii1_rxd2 */
-                       0x13c (PIN_INPUT_PULLUP | MUX_MODE2)    /* 
mii1_rxd1.rgmii1_rxd1 */
-                       0x140 (PIN_INPUT_PULLUP | MUX_MODE2)    /* 
mii1_rxd0.rgmii1_rxd0 */
+                       AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    
/* mii1_txen.rgmii1_tctl */
+                       AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE2)       
/* mii1_rxdv.rgmii1_rctl */
+                       AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    
/* mii1_txd3.rgmii1_td3 */
+                       AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    
/* mii1_txd2.rgmii1_td2 */
+                       AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    
/* mii1_txd1.rgmii1_td1 */
+                       AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    
/* mii1_txd0.rgmii1_td0 */
+                       AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE2)       
/* mii1_txclk.rgmii1_tclk */
+                       AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE2)       
/* mii1_rxclk.rgmii1_rclk */
+                       AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE2)       
/* mii1_rxd3.rgmii1_rxd3 */
+                       AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE2)       
/* mii1_rxd2.rgmii1_rxd2 */
+                       AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE2)       
/* mii1_rxd1.rgmii1_rxd1 */
+                       AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE2)       
/* mii1_rxd0.rgmii1_rxd0 */
                        /* ethernet interrupt */
-                       0x144 (PIN_INPUT_PULLUP | MUX_MODE7)    /* 
rmii2_refclk.gpio0_29 */
+                       AM33XX_IOPAD(0x944, PIN_INPUT_PULLUP | MUX_MODE7)       
/* rmii2_refclk.gpio0_29 */
                        /* ethernet PHY nReset */
-                       0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7)   /* 
mii1_col.gpio3_0 */
+                       AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLUP | MUX_MODE7)      
/* mii1_col.gpio3_0 */
                >;
        };
 
        mdio_pins: pinmux_mdio {
                pinctrl-single,pins = <
-                       0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    
/* mdio_data.mdio_data */
-                       0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   
/* mdio_clk.mdio_clk */
+                       AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | 
MUX_MODE0)       /* mdio_data.mdio_data */
+                       AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)      
                /* mdio_clk.mdio_clk */
                >;
        };
 };
@@ -363,45 +363,45 @@
 &am33xx_pinmux {
        sd_pins: pinmux_sd_card {
                pinctrl-single,pins = <
-                       0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)     /* 
mmc0_dat0.mmc0_dat0 */
-                       0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)     /* 
mmc0_dat1.mmc0_dat1 */
-                       0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)     /* 
mmc0_dat2.mmc0_dat2 */
-                       0xfc (PIN_INPUT_PULLUP | MUX_MODE0)     /* 
mmc0_dat3.mmc0_dat3 */
-                       0x100 (PIN_INPUT_PULLUP | MUX_MODE0)    /* 
mmc0_clk.mmc0_clk */
-                       0x104 (PIN_INPUT_PULLUP | MUX_MODE0)    /* 
mmc0_cmd.mmc0_cmd */
-                       0x160 (PIN_INPUT | MUX_MODE7)           /* 
spi0_cs1.gpio0_6 */
+                       AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)       
/* mmc0_dat0.mmc0_dat0 */
+                       AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)       
/* mmc0_dat1.mmc0_dat1 */
+                       AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)       
/* mmc0_dat2.mmc0_dat2 */
+                       AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)       
/* mmc0_dat3.mmc0_dat3 */
+                       AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)       
/* mmc0_clk.mmc0_clk */
+                       AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)       
/* mmc0_cmd.mmc0_cmd */
+                       AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)              
/* spi0_cs1.gpio0_6 */
                >;
        };
        emmc_pins: pinmux_emmc {
                pinctrl-single,pins = <
-                       0x80 (PIN_INPUT_PULLUP | MUX_MODE2)     /* 
gpmc_csn1.mmc1_clk */
-                       0x84 (PIN_INPUT_PULLUP | MUX_MODE2)     /* 
gpmc_csn2.mmc1_cmd */
-                       0x00 (PIN_INPUT_PULLUP | MUX_MODE1)     /* 
gpmc_ad0.mmc1_dat0 */
-                       0x04 (PIN_INPUT_PULLUP | MUX_MODE1)     /* 
gpmc_ad1.mmc1_dat1 */
-                       0x08 (PIN_INPUT_PULLUP | MUX_MODE1)     /* 
gpmc_ad2.mmc1_dat2 */
-                       0x0c (PIN_INPUT_PULLUP | MUX_MODE1)     /* 
gpmc_ad3.mmc1_dat3 */
-                       0x10 (PIN_INPUT_PULLUP | MUX_MODE1)     /* 
gpmc_ad4.mmc1_dat4 */
-                       0x14 (PIN_INPUT_PULLUP | MUX_MODE1)     /* 
gpmc_ad5.mmc1_dat5 */
-                       0x18 (PIN_INPUT_PULLUP | MUX_MODE1)     /* 
gpmc_ad6.mmc1_dat6 */
-                       0x1c (PIN_INPUT_PULLUP | MUX_MODE1)     /* 
gpmc_ad7.mmc1_dat7 */
+                       AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)       
/* gpmc_csn1.mmc1_clk */
+                       AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)       
/* gpmc_csn2.mmc1_cmd */
+                       AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)       
/* gpmc_ad0.mmc1_dat0 */
+                       AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)       
/* gpmc_ad1.mmc1_dat1 */
+                       AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)       
/* gpmc_ad2.mmc1_dat2 */
+                       AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)       
/* gpmc_ad3.mmc1_dat3 */
+                       AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)       
/* gpmc_ad4.mmc1_dat4 */
+                       AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)       
/* gpmc_ad5.mmc1_dat5 */
+                       AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)       
/* gpmc_ad6.mmc1_dat6 */
+                       AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)       
/* gpmc_ad7.mmc1_dat7 */
                        /* EMMC nReset */
-                       0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* 
gpmc_wpn.gpio0_31 */
+                       AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)      
/* gpmc_wpn.gpio0_31 */
                >;
        };
        wireless_pins: pinmux_wireless {
                pinctrl-single,pins = <
-                       0x44 (PIN_INPUT_PULLUP | MUX_MODE3)     /* 
gpmc_a1.mmc2_dat0 */
-                       0x48 (PIN_INPUT_PULLUP | MUX_MODE3)     /* 
gpmc_a2.mmc2_dat1 */
-                       0x4c (PIN_INPUT_PULLUP | MUX_MODE3)     /* 
gpmc_a3.mmc2_dat2 */
-                       0x78 (PIN_INPUT_PULLUP | MUX_MODE3)     /* 
gpmc_ben1.mmc2_dat3 */
-                       0x88 (PIN_INPUT_PULLUP | MUX_MODE3)     /* 
gpmc_csn3.mmc2_cmd */
-                       0x8c (PIN_INPUT_PULLUP | MUX_MODE3)     /* 
gpmc_clk.mmc1_clk */
+                       AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)       
/* gpmc_a1.mmc2_dat0 */
+                       AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)       
/* gpmc_a2.mmc2_dat1 */
+                       AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)       
/* gpmc_a3.mmc2_dat2 */
+                       AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)       
/* gpmc_ben1.mmc2_dat3 */
+                       AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)       
/* gpmc_csn3.mmc2_cmd */
+                       AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)       
/* gpmc_clk.mmc1_clk */
                        /* WLAN nReset */
-                       0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* 
gpmc_a8.gpio1_24 */
+                       AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7)      
/* gpmc_a8.gpio1_24 */
                        /* WLAN nPower down */
-                       0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* 
gpmc_wait0.gpio0_30 */
+                       AM33XX_IOPAD(0x870, PIN_OUTPUT_PULLUP | MUX_MODE7)      
/* gpmc_wait0.gpio0_30 */
                        /* 32kHz Clock */
-                       0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* 
xdma_event_intr1.clkout2 */
+                       AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)    
/* xdma_event_intr1.clkout2 */
                >;
        };
 };
@@ -497,10 +497,10 @@
 &am33xx_pinmux {
        spi0_pins: pinmux_spi0 {
                pinctrl-single,pins = <
-                       0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* 
spi0_sclk.spi0_sclk */
-                       0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* 
spi0_cs0.spi0_cs0 */
-                       0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 
*/
-                       0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 
*/
+                       AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* 
spi0_sclk.spi0_sclk */
+                       AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* 
spi0_cs0.spi0_cs0 */
+                       AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* 
spi0_d0.spi0_d0 */
+                       AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* 
spi0_d1.spi0_d1 */
                >;
        };
 };
@@ -538,16 +538,16 @@
 &am33xx_pinmux {
        uart0_pins: pinmux_uart0 {
                pinctrl-single,pins = <
-                       0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* 
uart0_rxd.uart0_rxd */
-                       0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* 
uart0_txd.uart0_txd */
+                       AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)       
/* uart0_rxd.uart0_rxd */
+                       AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    
/* uart0_txd.uart0_txd */
                >;
        };
        uart1_pins: pinmux_uart1 {
                pinctrl-single,pins = <
-                       0x178 (PIN_INPUT_PULLUP | MUX_MODE0)    /* 
uart1_ctsn.uart1_ctsn */
-                       0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* 
uart1_rtsn.uart1_rtsn */
-                       0x180 (PIN_INPUT_PULLUP | MUX_MODE0)    /* 
uart1_rxd.uart1_rxd */
-                       0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* 
uart1_txd.uart1_txd */
+                       AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0)       
/* uart1_ctsn.uart1_ctsn */
+                       AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    
/* uart1_rtsn.uart1_rtsn */
+                       AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)       
/* uart1_rxd.uart1_rxd */
+                       AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    
/* uart1_txd.uart1_txd */
                >;
        };
 };
@@ -590,9 +590,9 @@
        usb_pins: pinmux_usb {
                pinctrl-single,pins = <
                        /* USB0 Over-Current (active low) */
-                       0x64 (PIN_INPUT | MUX_MODE7)    /* gpmc_a9.gpio1_25 */
+                       AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)      /* 
gpmc_a9.gpio1_25 */
                        /* USB1 Over-Current (active low) */
-                       0x68 (PIN_INPUT | MUX_MODE7)    /* gpmc_a10.gpio1_26 */
+                       AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)      /* 
gpmc_a10.gpio1_26 */
                >;
        };
 };
@@ -648,16 +648,16 @@
 &am33xx_pinmux {
        user_leds_pins: pinmux_user_leds {
                pinctrl-single,pins = <
-                       0x50 (PIN_OUTPUT | MUX_MODE7)   /* gpmc_a4.gpio1_20 */
-                       0x54 (PIN_OUTPUT | MUX_MODE7)   /* gpmc_a5.gpio1_21 */
+                       AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE7)     /* 
gpmc_a4.gpio1_20 */
+                       AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)     /* 
gpmc_a5.gpio1_21 */
                >;
        };
 
        user_buttons_pins: pinmux_user_buttons {
                pinctrl-single,pins = <
-                       0x58 (PIN_INPUT_PULLUP | MUX_MODE7)     /* 
gpmc_a6.gpio1_22 */
-                       0x5C (PIN_INPUT_PULLUP | MUX_MODE7)     /* 
gpmc_a7.gpio1_21 */
-                       0x164 (PIN_INPUT_PULLUP | MUX_MODE7)    /* 
gpmc_a8.gpio0_7 */
+                       AM33XX_IOPAD(0x858, PIN_INPUT_PULLUP | MUX_MODE7)       
/* gpmc_a6.gpio1_22 */
+                       AM33XX_IOPAD(0x85C, PIN_INPUT_PULLUP | MUX_MODE7)       
/* gpmc_a7.gpio1_21 */
+                       AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE7)       
/* gpmc_a8.gpio0_7 */
                >;
        };
 };
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to