From: Uwe Kleine-König <u.kleine-koe...@pengutronix.de>
To allow supporting displays that need some logic to enable power to the
display add support for a vcc-supply property to drive a regulator.
Signed-off-by: Uwe Kleine-König <u.kleine-koe...@pengutronix.de>
---
Documentation/devicetree/bindings/video/panel-dpi.txt | 1 +
drivers/video/fbdev/omap2/displays-new/panel-dpi.c | 13 +++++++++++++
2 files changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/video/panel-dpi.txt
b/Documentation/devicetree/bindings/video/panel-dpi.txt
index 1a1d8f6f884f..eaa39d1b1279 100644
--- a/Documentation/devicetree/bindings/video/panel-dpi.txt
+++ b/Documentation/devicetree/bindings/video/panel-dpi.txt
@@ -8,6 +8,7 @@ Optional properties:
- label: a symbolic name for the panel
- enable-gpios: panel enable gpio
- reset-gpios: GPIO to control the RESET pin
+- vcc-supply: phandle of regulator that will be used to enable power to the
display
Required nodes:
- "panel-timing" containing video timings
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
index 7e2f9e0813dc..65c6d9e6862b 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
@@ -15,6 +15,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/regulator/consumer.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
@@ -33,6 +34,7 @@ struct panel_drv_data {
struct gpio_desc *enable_gpio;
struct gpio_desc *reset_gpio;
+ struct regulator *vcc_supply;
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
@@ -84,6 +86,12 @@ static int panel_dpi_enable(struct omap_dss_device *dssdev)
if (r)
return r;
+ r = regulator_enable(ddata->vcc_supply);
+ if (r) {
+ in->ops.dpi->disable(in);
+ return r;
+ }
+
gpiod_set_value_cansleep(ddata->reset_gpio, 0);
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
@@ -107,6 +115,7 @@ static void panel_dpi_disable(struct omap_dss_device
*dssdev)
gpio_set_value_cansleep(ddata->backlight_gpio, 0);
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
+ regulator_disable(ddata->vcc_supply);
in->ops.dpi->disable(in);
@@ -218,6 +227,10 @@ static int panel_dpi_probe_of(struct platform_device *pdev)
if (IS_ERR(ddata->reset_gpio))
return PTR_ERR(ddata->reset_gpio);
+ ddata->vcc_supply = devm_regulator_get(&pdev->dev, "vcc");
+ if (IS_ERR(ddata->vcc_supply))
+ return PTR_ERR(ddata->vcc_supply);
+
ddata->backlight_gpio = -ENOENT;
r = of_get_display_timing(node, "panel-timing", &timing);
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
