* Tony Lindgren <t...@atomide.com> [151215 13:02]:
> On dm814x we have 13 ADPLLs with 3 to 4 outputs on each. The
> ADPLLs have several dividers and muxes controlled by a shared
> control register for each PLL.
>
> Note that for the clocks to work as device drivers for booting on
> dm814x, this patch depends on "ARM: OMAP2+: Change core_initcall
> levels to postcore_initcall".
>
> Also note that this patch does not implement clk_set_rate for the
> PLL, that will be posted later on when available.
>
> Cc: Michael Turquette <mturque...@baylibre.com>
> Cc: Stephen Boyd <sb...@codeaurora.org>
> Cc: Tero Kristo <t-kri...@ti.com>
> Signed-off-by: Tony Lindgren <t...@atomide.com>
> ---
> Changes from v2 to v3 are listed below, hopefully I addressed everybody's
> comments,please check and let me know if I missed something.
Everybody OK with this version as no more comments?
I found a few issues that are worth merging while testing:
- We want to create the clkdev entry for all clocks, not just outputs
- ti_adpll_wait_lock loops did not do the right thing
- We want to use CLK_GET_RATE_NOCACHE in ti_adpll_init_dco
Diff against v3 below for reference, will also send out v4 separately.
Regards,
Tony
8< ---------------------
--- a/drivers/clk/ti/adpll.c
+++ b/drivers/clk/ti/adpll.c
@@ -228,9 +228,6 @@ static int ti_adpll_setup_clock(struct ti_adpll_data *d,
struct clk *clock,
d->clocks[index].clk = clock;
d->clocks[index].unregister = unregister;
- if (output_index < 0)
- return 0;
-
/* Separate con_id in format "pll040dcoclkldo" to fit MAX_CON_ID */
postfix = strrchr(name, '.');
if (strlen(postfix) > 1) {
@@ -246,6 +243,9 @@ static int ti_adpll_setup_clock(struct ti_adpll_data *d,
struct clk *clock,
dev_warn(d->dev, "no con_id for clock %s\n", name);
}
+ if (output_index < 0)
+ return 0;
+
d->outputs.clks[output_index] = clock;
d->outputs.clk_num++;
@@ -418,7 +418,7 @@ static int ti_adpll_wait_lock(struct ti_adpll_data *d)
if (ti_adpll_is_locked(d))
return 0;
usleep_range(200, 300);
- } while (retries-- <= 0);
+ } while (retries--);
dev_err(d->dev, "pll failed to lock\n");
return -ETIMEDOUT;
@@ -527,6 +527,7 @@ static int ti_adpll_init_dco(struct ti_adpll_data *d)
init.parent_names = d->parent_names;
init.num_parents = d->c->nr_max_inputs;
init.ops = &ti_adpll_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
d->dco.hw.init = &init;
if (d->c->is_type_s)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
