On Wednesday 06 January 2016 01:12 PM, H. Nikolaus Schaller wrote:

Am 06.01.2016 um 00:40 schrieb Nishanth Menon <n...@ti.com>:

On 01/05/2016 06:01 AM, H. Nikolaus Schaller wrote:
+               rtc {
+                       compatible = "ti,palmas-rtc";
+                       interrupt-parent = <&palmas>;
+                       interrupts = <8 IRQ_TYPE_NONE>;
IRQ_TYPE_NONE is not correct here -> it should have some polarity - if
it had none, there'd be no interrupt, right?
Well, it just translates IRQ_TYPE_NONE through



interrupts = <8 0>;

which is given as an example in


Since I don't know anything about the rtc driver beyond the bindings 
documentation I assume it is correct...
I have added Laxman Dewangan because he introduced this interrupts = <8 0>;

As this is for palmas interrupt controller, it does not use the second field for interrupt from RTC.
So there is no really any polarity. It can be set to 0.

The second argument will be used for GPIOs mainly. However, support need to be added on GPIO driver for rising/falling configuration.

To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to