The CM_CLKEN_PLL register saved in scratchpad memory was wrongly using offset of 0x0004 instead of 0x0000.
The effect of this was that boot ROM code would restore the wrong value when waking up from off mode. This wrong value, however, will be overwritten by prcm context restore. Still, a short period of wrong clock settings in CM_CLKEN_PLL remained between ROM code and prcm context restore. This is fixed by the patch. Problem reported by: Jouni Högander <[email protected]> Signed-off-by: Kalle Jokiniemi <[email protected]> --- arch/arm/mach-omap2/control.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index a0429fe..60de860 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -235,7 +235,7 @@ void omap3_save_scratchpad_contents(void) prcm_block_contents.cm_clksel_wkup = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); prcm_block_contents.cm_clken_pll = - cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKEN_PLL); + cm_read_mod_reg(PLL_MOD, CM_CLKEN); prcm_block_contents.cm_autoidle_pll = cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL); prcm_block_contents.cm_clksel1_pll = -- 1.5.4.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
