This patch enables support for UART4 on OMAP4430 development platform. Updating the patch with kevin's comments.
Signed-off-by: <[email protected]> --- arch/arm/mach-omap2/board-4430sdp.c | 2 +- arch/arm/mach-omap2/serial.c | 10 ++++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) Index: omap4_dev/arch/arm/mach-omap2/board-4430sdp.c =================================================================== --- omap4_dev.orig/arch/arm/mach-omap2/board-4430sdp.c +++ omap4_dev/arch/arm/mach-omap2/board-4430sdp.c @@ -39,7 +39,7 @@ static struct platform_device *sdp4430_d }; static struct omap_uart_config sdp4430_uart_config __initdata = { - .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2), + .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3), }; static struct omap_lcd_config sdp4430_lcd_config __initdata = { Index: omap4_dev/arch/arm/mach-omap2/serial.c =================================================================== --- omap4_dev.orig/arch/arm/mach-omap2/serial.c +++ omap4_dev/arch/arm/mach-omap2/serial.c @@ -54,6 +54,16 @@ static struct plat_serial8250_port seria .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { +#ifdef CONFIG_ARCH_OMAP4 + .membase = IO_ADDRESS(OMAP_UART4_BASE), + .mapbase = OMAP_UART4_BASE, + .irq = 70, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = OMAP24XX_BASE_BAUD * 16, + }, { +#endif .flags = 0 } }; -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
