Bump..

This patch was acked by David Brownell earlier in the thread.

Regards,
Amit

On Wed, May 06, 2009 at 03:03:38PM +0300, Amit Kucheria wrote:
> Check for return values of i2c read/write operations and size of scripts being
> uploaded to TWL4030
> 
> (Removed the unrelated string changes based on David Brownell's comment)
> 
> Signed-off-by: Amit Kucheria <[email protected]>
> ---
>  drivers/mfd/twl4030-power.c |   52 +++++++++++++++++++++++++++++++-----------
>  1 files changed, 38 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
> index 9dc493b..8f5d149 100644
> --- a/drivers/mfd/twl4030-power.c
> +++ b/drivers/mfd/twl4030-power.c
> @@ -257,36 +257,40 @@ static int __init config_warmreset_sequence(u8 address)
>       return err;
>  }
>  
> -void twl4030_configure_resource(struct twl4030_resconfig *rconfig)
> +static int __init twl4030_configure_resource(struct twl4030_resconfig 
> *rconfig)
>  {
>       int rconfig_addr;
> +     int err;
>       u8 type;
>  
>       if (rconfig->resource > NUM_OF_RESOURCES) {
>               printk(KERN_ERR
>                       "TWL4030 Resource %d does not exist\n",
>                       rconfig->resource);
> -             return;
> +             return -EINVAL;
>       }
>  
>       rconfig_addr = res_config_addrs[rconfig->resource];
>  
>       /* Set resource group */
> -
>       if (rconfig->devgroup >= 0)
> -             twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> +             err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
>                                       rconfig->devgroup << 5,
>                                       rconfig_addr + DEVGROUP_OFFSET);
> +     if (err < 0) {
> +             printk(KERN_ERR
> +                    "TWL4030 failed to program devgroup");
> +             return err;
> +     }
>  
>       /* Set resource types */
> -
> -     if (twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER,
> -                                     &type,
> -                                     rconfig_addr + TYPE_OFFSET) < 0) {
> +     err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type,
> +                               rconfig_addr + TYPE_OFFSET);
> +     if (err < 0) {
>               printk(KERN_ERR
> -                     "TWL4030 Resource %d type could not read\n",
> -                     rconfig->resource);
> -             return;
> +                    "TWL4030 Resource %d type could not be read\n",
> +                    rconfig->resource);
> +             return err;
>       }
>  
>       if (rconfig->type >= 0) {
> @@ -299,8 +303,15 @@ void twl4030_configure_resource(struct twl4030_resconfig 
> *rconfig)
>               type |= rconfig->type2 << 3;
>       }
>  
> -     twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> +     err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
>                               type, rconfig_addr + TYPE_OFFSET);
> +     if (err < 0) {
> +             printk(KERN_ERR
> +                    "TWL4030 failed to program resource type");
> +             return err;
> +     }
> +
> +     return 0;
>  
>  }
>  
> @@ -309,6 +320,12 @@ static int __init load_triton_script(struct 
> twl4030_script *tscript)
>       u8 address = triton_next_free_address;
>       int err;
>  
> +     /* Make sure the script isn't going beyond last valid address */
> +     if ((address + tscript->size) > (END_OF_SCRIPT-1)) {
> +             printk(KERN_ERR "TWL4030 script too big error\n");
> +             return -EINVAL;
> +     }
> +
>       err = twl4030_write_script(address, tscript->script, tscript->size);
>       if (err)
>               return err;
> @@ -346,15 +363,22 @@ void __init twl4030_power_init(struct 
> twl4030_power_data *triton2_scripts)
>  
>       for (i = 0; i < triton2_scripts->size; i++) {
>               err = load_triton_script(triton2_scripts->scripts[i]);
> -             if (err)
> +             if (err < 0) {
> +                     printk(KERN_ERR "TWL4030 failed to load scripts");
>                       break;
> +             }
>       }
>  
>       resconfig = triton2_scripts->resource_config;
>       if (resconfig) {
>               while (resconfig->resource) {
> -                     twl4030_configure_resource(resconfig);
> +                     err = twl4030_configure_resource(resconfig);
>                       resconfig++;
> +                     if (err < 0) {
> +                             printk(KERN_ERR
> +                                    "TWL4030 failed to configure resource");
> +                             break;
> +                     }
>               }
>       }
>  
> -- 
> 1.6.0.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
-------------------------------------------------------------------------
Amit Kucheria,                           Kernel Developer, Verdurent
-------------------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to