From: Eero Nurkkala <[email protected]>

When data is read through DMA, the last element must be read separately
through the RX register. It cannot be transferred by the DMA. For further
details see e.g. OMAP3430 TRM.

Without the fix the driver causes extra clocks to be clocked to the
bus after DMA RX operations. This can cause interesting behaviour with
some devices.

Reported-by: Juuso Oikarinen <[email protected]>
Signed-off-by: Juuso Oikarinen <[email protected]>
Signed-off-by: Eero Nurkkala <[email protected]>
[[email protected]: Simplified the patch while keeping the idea.]
Signed-off-by: Aaro Koskinen <[email protected]>
---
 drivers/spi/omap2_mcspi.c |   21 ++++++++++++++++++++-
 1 files changed, 20 insertions(+), 1 deletions(-)

diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index d6d0c5d..0f640b0 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -269,7 +269,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct 
spi_transfer *xfer)
 
        if (rx != NULL) {
                omap_set_dma_transfer_params(mcspi_dma->dma_rx_channel,
-                               data_type, element_count, 1,
+                               data_type, element_count - 1, 1,
                                OMAP_DMA_SYNC_ELEMENT,
                                mcspi_dma->dma_rx_sync_dev, 1);
 
@@ -300,6 +300,25 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct 
spi_transfer *xfer)
        if (rx != NULL) {
                wait_for_completion(&mcspi_dma->dma_rx_completion);
                dma_unmap_single(NULL, xfer->rx_dma, count, DMA_FROM_DEVICE);
+               omap2_mcspi_set_enable(spi, 0);
+               if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0) &
+                       OMAP2_MCSPI_CHSTAT_RXS)) {
+                       u32 w;
+
+                       w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
+                       if (word_len <= 8)
+                               ((u8 *)xfer->rx_buf)[element_count - 1] = w;
+                       else if (word_len <= 16)
+                               ((u16 *)xfer->rx_buf)[element_count - 1] = w;
+                       else /* word_len <= 32 */
+                               ((u32 *)xfer->rx_buf)[element_count - 1] = w;
+               } else {
+                       dev_err(&spi->dev, "DMA RX last word empty");
+                       count -= (word_len <= 8)  ? 1 :
+                                (word_len <= 16) ? 2 :
+                              /* word_len <= 32 */ 4;
+               }
+               omap2_mcspi_set_enable(spi, 1);
        }
        return count;
 }
-- 
1.5.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to