On Fri, 12 Jun 2009 12:32:51 -0500
Vikram Pandita <vikram.pand...@ti.com> wrote:
> There is currently no provision for passing IRQ trigger flags for
> serial IRQs with triggering requirements (such as GPIO IRQs.)
>
> This patch adds UPF_IRQ_TRIG_* flags which map on to IRQF_TRIGGER_*
> flags.
>
> Signed-off-by: Vikram Pandita <vikram.pand...@ti.com>
> Acked-by: Kevin Hilman <khil...@deeprootsystems.com>
Note that this patch doesn't allow the interrupt to trigger on both
edges (not that I have ever seen a 8250 with this behavior, but this
is a valid configuration from an interrupt point of view).
Aside from this remark:
Acked-by: Marc Zyngier <m...@misterjones.org>
> ---
> drivers/serial/8250.c | 10 ++++++++++
> include/linux/serial_core.h | 4 ++++
> 2 files changed, 14 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
> index bab115e..8235ef5 100644
> --- a/drivers/serial/8250.c
> +++ b/drivers/serial/8250.c
> @@ -1641,6 +1641,16 @@ static int serial_link_irq_chain(struct
> uart_8250_port *up) struct irq_info *i;
> int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ?
> IRQF_SHARED : 0;
> + /* Get IRQ Trigger Flag */
> + if (up->port.flags & UPF_IRQ_TRIG_RISING)
> + irq_flags |= IRQF_TRIGGER_RISING;
> + else if (up->port.flags & UPF_IRQ_TRIG_FALLING)
> + irq_flags |= IRQF_TRIGGER_FALLING;
> + else if (up->port.flags & UPF_IRQ_TRIG_HIGH)
> + irq_flags |= IRQF_TRIGGER_HIGH;
> + else if (up->port.flags & UPF_IRQ_TRIG_LOW)
> + irq_flags |= IRQF_TRIGGER_LOW;
> +
> mutex_lock(&hash_mutex);
>
> h = &irq_lists[up->port.irq % NR_IRQ_HASH];
> diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
> index 57a97e5..07591d5 100644
> --- a/include/linux/serial_core.h
> +++ b/include/linux/serial_core.h
> @@ -296,7 +296,11 @@ struct uart_port {
> #define UPF_SPD_WARP ((__force upf_t) (0x1010))
> #define UPF_SKIP_TEST ((__force upf_t) (1 << 6))
> #define UPF_AUTO_IRQ ((__force upf_t) (1 << 7))
> +#define UPF_IRQ_TRIG_RISING ((__force upf_t) (1 << 8))
> +#define UPF_IRQ_TRIG_FALLING ((__force upf_t) (1 << 9))
> +#define UPF_IRQ_TRIG_HIGH ((__force upf_t) (1 << 10))
> #define UPF_HARDPPS_CD ((__force upf_t) (1 << 11))
> +#define UPF_IRQ_TRIG_LOW ((__force upf_t) (1 << 12))
> #define UPF_LOW_LATENCY ((__force upf_t) (1 << 13))
> #define UPF_BUGGY_UART ((__force upf_t) (1 << 14))
> #define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
