On Sun, Jun 14, 2009 at 11:29:06PM +0200, ext Krzysztof Helt wrote:
> On Thu, 4 Jun 2009 20:52:30 +0300
> Imre Deak <[email protected]> wrote:
>
> > From: Hunyue Yau <[email protected]>
> >
> > Add glue to control the 2430SDP LCD as a frame buffer device
> > using the existing dispc.c driver under omapfb.
> >
> > Signed-off-by: Hunyue Yau <[email protected]>
> > Signed-off-by: Kevin Hilman <[email protected]>
> > Signed-off-by: Tony Lindgren <[email protected]>
> > Fixed-by: Kevin Hilman <[email protected]>
> > Fixed-by: Sergio Aguirre <[email protected]>
> > Fixed-by: Francisco Alecrim <[email protected]>
> > Fixed-by: Tony Lindgren <[email protected]>
> > Fixed-by: David Brownell <[email protected]>
> > Signed-off-by: Imre Deak <[email protected]>
> > ---
> > drivers/video/omap/Makefile | 1 +
> > drivers/video/omap/lcd_2430sdp.c | 196
> > ++++++++++++++++++++++++++++++++++++++
> > 2 files changed, 197 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/video/omap/lcd_2430sdp.c
> >
> > diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
> > index 2bf94ad..7a37b03 100644
> > --- a/drivers/video/omap/Makefile
> > +++ b/drivers/video/omap/Makefile
> > @@ -26,6 +26,7 @@ objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR)
> > += lcd_inn1510.o
> > objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
> >
> > objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o
> > +objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o
> > objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
> >
> > omapfb-objs := $(objs-yy)
> diff --git a/drivers/video/omap/lcd_2430sdp.c
> b/drivers/video/omap/lcd_2430sdp.c
> new file mode 100644
> index 0000000..5bcbb8d
> --- /dev/null
> +++ b/drivers/video/omap/lcd_2430sdp.c
> @@ -0,0 +1,196 @@
> +/*
> + * LCD panel support for the TI 2430SDP board
> + *
> + * Copyright (C) 2007 MontaVista
> + * Author: Hunyue Yau <[email protected]>
> + *
> + * Derived from drivers/video/omap/lcd-apollon.c
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/delay.h>
> +#include <linux/gpio.h>
> +#include <linux/i2c/twl4030.h>
> +
> +#include <mach/mux.h>
> +#include <mach/omapfb.h>
> +#include <asm/mach-types.h>
> +
> +#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
> +#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
> +#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24
> +#define SDP3430_LCD_PANEL_ENABLE_GPIO 28
> +
> +static unsigned backlight_gpio;
> +static unsigned enable_gpio;
> +
> +#define LCD_PANEL_BACKLIGHT_GPIO 91
> +#define LCD_PANEL_ENABLE_GPIO 154
> +#define LCD_PIXCLOCK_MAX 5400 /* freq 5.4 MHz */
> +#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER
> +#define ENABLE_VAUX2_DEDICATED 0x09
> +#define ENABLE_VAUX2_DEV_GRP 0x20
> +
> +
> +#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v)
> +
> +
> +static int sdp2430_panel_init(struct lcd_panel *panel,
> + struct omapfb_device *fbdev)
> +{
> + if (machine_is_omap_3430sdp()) {
> + enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO;
> + backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
> + } else {
> + enable_gpio = SDP2430_LCD_PANEL_ENABLE_GPIO;
> + backlight_gpio = SDP2430_LCD_PANEL_BACKLIGHT_GPIO;
> + }
>
> The same assingments in both clauses. No if() is required.
They are different, SDP3430_* vs. SDP2430_*.
>
> +
> + gpio_request(enable_gpio, "LCD enable"); /* LCD panel */
> + gpio_request(backlight_gpio, "LCD bl"); /* LCD backlight */
> + gpio_direction_output(enable_gpio, 0);
> + gpio_direction_output(backlight_gpio, 0);
> +
> + return 0;
> +}
> +
> +static void sdp2430_panel_cleanup(struct lcd_panel *panel)
> +{
>
> Should the requested gpios be freed?
Yes, agreed. I will follow-up with a patchset that fixes this and similar
places in the other panel drivers.
>
> +}
> +
> +static int sdp2430_panel_enable(struct lcd_panel *panel)
> +{
> + u8 ded_val, ded_reg;
> + u8 grp_val, grp_reg;
> +
> + if (machine_is_omap_3430sdp()) {
> + ded_reg = TWL4030_VAUX3_DEDICATED;
> + ded_val = ENABLE_VAUX3_DEDICATED;
> + grp_reg = TWL4030_VAUX3_DEV_GRP;
> + grp_val = ENABLE_VAUX3_DEV_GRP;
> +
> + if (omap_rev() > OMAP3430_REV_ES1_0) {
> + t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED,
> + TWL4030_VPLL2_DEDICATED);
> + t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP,
> + TWL4030_VPLL2_DEV_GRP);
> + }
> + } else {
> + ded_reg = TWL4030_VAUX2_DEDICATED;
> + ded_val = ENABLE_VAUX2_DEDICATED;
> + grp_reg = TWL4030_VAUX2_DEV_GRP;
> + grp_val = ENABLE_VAUX2_DEV_GRP;
> + }
>
> Again, please put the same assingments outside the if () clause.
They are different, VAUX2 vs. VAUX3 .
> +
> + gpio_set_value(enable_gpio, 1);
> + gpio_set_value(backlight_gpio, 1);
> +
> + if (0 != t2_out(PM_RECEIVER, ded_val, ded_reg))
> + return -EIO;
> + if (0 != t2_out(PM_RECEIVER, grp_val, grp_reg))
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static void sdp2430_panel_disable(struct lcd_panel *panel)
> +{
> + gpio_set_value(enable_gpio, 0);
> + gpio_set_value(backlight_gpio, 0);
> + if (omap_rev() > OMAP3430_REV_ES1_0) {
> + t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED);
> + t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP);
> + mdelay(4);
> + }
> +}
>
> Please use msleep() instead of the mdelay().
Ok, I'll change this.
>
> +
> +static unsigned long sdp2430_panel_get_caps(struct lcd_panel *panel)
> +{
> + return 0;
> +}
> +
> +struct lcd_panel sdp2430_panel = {
> + .name = "sdp2430",
> + .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
> + OMAP_LCDC_INV_HSYNC,
> +
> + .bpp = 16,
> + .data_lines = 16,
> + .x_res = 240,
> + .y_res = 320,
> + .hsw = 3, /* hsync_len (4) - 1 */
> + .hfp = 3, /* right_margin (4) - 1 */
> + .hbp = 39, /* left_margin (40) - 1 */
> + .vsw = 1, /* vsync_len (2) - 1 */
> + .vfp = 2, /* lower_margin */
> + .vbp = 7, /* upper_margin (8) - 1 */
> +
> + .pixel_clock = LCD_PIXCLOCK_MAX,
> +
> + .init = sdp2430_panel_init,
> + .cleanup = sdp2430_panel_cleanup,
> + .enable = sdp2430_panel_enable,
> + .disable = sdp2430_panel_disable,
> + .get_caps = sdp2430_panel_get_caps,
> +};
> +
> +static int sdp2430_panel_probe(struct platform_device *pdev)
> +{
> + omapfb_register_panel(&sdp2430_panel);
> + return 0;
> +}
> +
> +static int sdp2430_panel_remove(struct platform_device *pdev)
> +{
> + return 0;
> +}
> +
> +static int sdp2430_panel_suspend(struct platform_device *pdev,
> + pm_message_t mesg)
> +{
> + return 0;
> +}
> +
> +static int sdp2430_panel_resume(struct platform_device *pdev)
> +{
> + return 0;
> +}
> +
> +struct platform_driver sdp2430_panel_driver = {
> + .probe = sdp2430_panel_probe,
> + .remove = sdp2430_panel_remove,
> + .suspend = sdp2430_panel_suspend,
>
> There is small indentation defect before the '='.
Fixing it.
Thanks,
Imre
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
