> -----Original Message----- > From: [email protected] [mailto:linux-omap- > [email protected]] On Behalf Of Kevin Hilman > Sent: Thursday, June 18, 2009 10:32 AM > To: V, Hemanth > Cc: Tony Lindgren; [email protected] > Subject: Re: L-O master branch broken ? > > "Hemanth V" <[email protected]> writes: > > > ----- Original Message ----- > > From: "Tony Lindgren" <[email protected]> > > To: "Hemanth V" <[email protected]> > > Cc: "Kevin Hilman" <[email protected]>; > > <[email protected]> > > Sent: Thursday, June 18, 2009 3:52 PM > > Subject: Re: L-O master branch broken ? > > > > > >>* Hemanth V <[email protected]> [090618 13:39]: > >>> ----- Original Message ----- From: "Tony Lindgren" <[email protected]> > >>> > >>> > >>>>> I get the below error while compiling 3430SDP. I see below commit > >>>>> as the > >>>>> latest one. > >>> > >>>> > >>>> Thanks, pushing a fix right now with the missing brace missing from > >>>> Kevin's > >>>> sram.c patch. Also moved around the defines so sram.c build for > omap1. > >>>> > >>> > >>> Booting still seems to have problems. Its hung after start kernel > >>> > >>> > >>> Bytes transferred = 2480664 (25da18 hex) > >>> ## Booting image at 80000000 ... > >>> Image Name: Linux-2.6.30-omap1-06022-g6f4712 > >>> Image Type: ARM Linux Kernel Image (uncompressed) > >>> Data Size: 2480600 Bytes = 2.4 MB > >>> Load Address: 80008000 > >>> Entry Point: 80008000 > >>> Verifying Checksum ... OK > >>> OK > >>> > >>> Starting kernel ... > >>> > >> > >> Can you see what happens with DEBUG_LL enabled? > > > > Doesn't seem to show any additional messages even with > > DEBUG_LL enabled > > Since you don't even see 'Uncompressing Linux....', I'm guessing you > have CONFIG_OMAP_LL_DEBUG_UART3=y in your .config > > Try setting this to UART1.
I tried this on my SDP, and enabling both options, it boots! But without enabling low level debug, it doesn't... Does that ring any bells? Am I missing something? Regards, Sergio > > Kevin > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
