From: Eero Nurkkala <[email protected]> This patch enables the smart idle mode while McBPS is being utilized. Once it's done, force idle mode is taken instead. Apart of it, it also configures what signals will wake mcbsp up.
Signed-off-by: Eero Nurkkala <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]> --- arch/arm/plat-omap/include/mach/mcbsp.h | 17 +++++++++++++++ arch/arm/plat-omap/mcbsp.c | 35 +++++++++++++++++++++++++++++++ 2 files changed, 52 insertions(+), 0 deletions(-) diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 77191c5..758ad5c 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -134,6 +134,7 @@ #define OMAP_MCBSP_REG_XCERG 0x74 #define OMAP_MCBSP_REG_XCERH 0x78 #define OMAP_MCBSP_REG_SYSCON 0x8C +#define OMAP_MCBSP_REG_WAKEUPEN 0xA8 #define OMAP_MCBSP_REG_XCCR 0xAC #define OMAP_MCBSP_REG_RCCR 0xB0 @@ -249,8 +250,24 @@ #define RDISABLE 0x0001 /********************** McBSP SYSCONFIG bit definitions ********************/ +#define SIDLEMODE(value) ((value)<<3) +#define ENAWAKEUP 0x0004 #define SOFTRST 0x0002 +/********************** McBSP WAKEUPEN bit definitions *********************/ +#define XEMPTYEOFEN 0x4000 +#define XRDYEN 0x0400 +#define XEOFEN 0x0200 +#define XFSXEN 0x0100 +#define XSYNCERREN 0x0080 +#define RRDYEN 0x0008 +#define REOFEN 0x0004 +#define RFSREN 0x0002 +#define RSYNCERREN 0x0001 +#define WAKEUPEN_ALL (XEMPTYEOFEN | XRDYEN | XEOFEN | XFSXEN | \ + XSYNCERREN | RRDYEN | REOFEN | RFSREN | \ + RSYNCERREN) + /* we don't do multichannel for now */ struct omap_mcbsp_reg_cfg { u16 spcr2; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 84cc323..b64896b 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -257,6 +257,23 @@ int omap_mcbsp_request(unsigned int id) clk_enable(mcbsp->iclk); clk_enable(mcbsp->fclk); +#ifdef CONFIG_ARCH_OMAP34XX + /* + * Enable wakup behavior, smart idle and all wakeups + * REVISIT: some wakeups may be unnecessary + */ + if (cpu_is_omap34xx()) { + u16 syscon; + + syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); + syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03)); + syscon |= (ENAWAKEUP | SIDLEMODE(0x02)); + OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); + + OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, WAKEUPEN_ALL); + } +#endif + /* * Make sure that transmitter, receiver and sample-rate generator are * not running before activating IRQs. @@ -295,6 +312,7 @@ EXPORT_SYMBOL(omap_mcbsp_request); void omap_mcbsp_free(unsigned int id) { struct omap_mcbsp *mcbsp; + u16 wakeupen; if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); @@ -305,6 +323,23 @@ void omap_mcbsp_free(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(id); +#ifdef CONFIG_ARCH_OMAP34XX + /* + * Disable wakup behavior, smart idle and all wakeups + */ + if (cpu_is_omap34xx()) { + u16 syscon; + + syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); + syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03)); + OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); + + wakeupen = OMAP_MCBSP_READ(mcbsp->io_base, WAKEUPEN); + wakeupen &= ~WAKEUPEN_ALL; + OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, wakeupen); + } +#endif + clk_disable(mcbsp->fclk); clk_disable(mcbsp->iclk); -- 1.6.2.GIT -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
