Signed-off-by: Tomi Valkeinen <tomi.valkei...@nokia.com> --- drivers/video/omap2/dss/sdi.c | 370 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 370 insertions(+), 0 deletions(-) create mode 100644 drivers/video/omap2/dss/sdi.c
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c new file mode 100644 index 0000000..2f4d226 --- /dev/null +++ b/drivers/video/omap2/dss/sdi.c @@ -0,0 +1,370 @@ +/* + * linux/drivers/video/omap2/dss/sdi.c + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkei...@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define DSS_SUBSYS_NAME "SDI" + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <mach/board.h> +#include <mach/display.h> +#include "dss.h" + +#define CONTROL_PADCONF_BASE 0x48002000 + +#define OMAP_SDI_PAD_DIS(pe, pu) ((7 << 0) | /* MODE 7 = safe */ \ + (((pe) ? 1 : 0) << 3) | /* PULL_ENA */ \ + (((pu) ? 1 : 0) << 4) | /* PULL_UP */ \ + (1 << 8)) /* INPUT_EN */ + +#define OMAP_SDI_PAD_EN (1 << 0) /* MODE 1 = SDI_xx */ + +#define OMAP_SDI_PAD_MASK OMAP_SDI_PAD_DIS(1, 1) + +static struct { + bool skip_init; + bool update_enabled; +} sdi; + +/* CONTROL_PADCONF_DSS_DATAXX */ +static const u16 sdi_pads[] = +{ + 0x0f0, /* 10[ 7..0]:SDI_DAT1N */ + 0x0f2, /* 10[15..0]:SDI_DAT1P */ + 0x0f4, /* 12[ 7..0]:SDI_DAT2N */ + 0x0f6, /* 12[15..0]:SDI_DAT2P */ + 0x0f8, /* 14[ 7..0]:SDI_DAT3N */ + 0x0fa, /* 14[15..0]:SDI_DAT3P */ + 0x108, /* 22[ 7..0]:SDI_CLKN */ + 0x10a, /* 22[15..0]:SDI_CLKP */ +}; + +/* + * Check if bootloader / platform code has configured the SDI pads properly. + * This means it either configured all required pads for SDI mode, or that it + * left all the required pads unconfigured. + */ +static int sdi_pad_init(struct omap_dss_device *dssdev) +{ + unsigned req_map; + bool configured = false; + bool unconfigured = false; + int data_pairs; + int i; + + data_pairs = dssdev->phy.sdi.datapairs; + req_map = (1 << (data_pairs * 2)) - 1; /* data lanes */ + req_map |= 3 << 6; /* clk lane */ + for (i = 0; i < ARRAY_SIZE(sdi_pads); i++) { + u32 reg; + u32 val; + + if (!((1 << i) & req_map)) + /* Ignore unneded pads. */ + continue; + reg = CONTROL_PADCONF_BASE + sdi_pads[i]; + val = omap_readw(reg); + switch (val & 0x07) { /* pad mode */ + case 1: + if (unconfigured) + break; + /* Is the pull configuration ok for SDI mode? */ + if ((val & OMAP_SDI_PAD_MASK) != OMAP_SDI_PAD_EN) + break; + configured = true; + break; + case 0: + case 7: + if (configured) + break; + unconfigured = true; + break; + default: + break; + } + } + if (i != ARRAY_SIZE(sdi_pads)) { + DSSERR("SDI: invalid pad configuration\n"); + return -1; + } + + return 0; +} + +static void sdi_pad_config(struct omap_dss_device *dssdev, bool enable) +{ + int data_pairs; + bool pad_off_pe, pad_off_pu; + unsigned req_map; + int i; + + data_pairs = dssdev->phy.sdi.datapairs; + pad_off_pe = dssdev->phy.sdi.pad_off_pe; + pad_off_pu = dssdev->phy.sdi.pad_off_pu; + req_map = (1 << (data_pairs * 2)) - 1; /* data lanes */ + req_map |= 3 << 6; /* clk lane */ + for (i = 0; i < ARRAY_SIZE(sdi_pads); i++) { + u32 reg; + u16 val; + + if (!((1 << i) & req_map)) + continue; + if (enable) + val = OMAP_SDI_PAD_EN; + else + val = OMAP_SDI_PAD_DIS(pad_off_pe, pad_off_pu); + reg = CONTROL_PADCONF_BASE + sdi_pads[i]; + omap_writew(val, reg); + } +} + +static void sdi_basic_init(void) +{ + dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); + + dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); + dispc_set_tft_data_lines(24); + dispc_lcd_enable_signal_polarity(1); +} + +static int sdi_display_enable(struct omap_dss_device *dssdev) +{ + struct omap_video_timings *t = &dssdev->panel.timings; + struct dispc_clock_info cinfo; + u16 lck_div, pck_div; + unsigned long fck; + unsigned long pck; + int r; + + r = omap_dss_start_device(dssdev); + if (r) { + DSSERR("failed to start device\n"); + goto err0; + } + + if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { + DSSERR("dssdev already enabled\n"); + r = -EINVAL; + goto err1; + } + + sdi_pad_config(dssdev, 1); + + /* In case of skip_init sdi_init has already enabled the clocks */ + if (!sdi.skip_init) + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + + sdi_basic_init(); + + /* 15.5.9.1.2 */ + dssdev->panel.config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF; + + dispc_set_pol_freq(dssdev->panel.config, dssdev->panel.acbi, + dssdev->panel.acb); + + if (!sdi.skip_init) + r = dispc_calc_clock_div(1, t->pixel_clock * 1000, + &cinfo); + else + r = dispc_get_clock_div(&cinfo); + + if (r) + goto err2; + + fck = cinfo.fck; + lck_div = cinfo.lck_div; + pck_div = cinfo.pck_div; + + pck = fck / lck_div / pck_div / 1000; + + if (pck != t->pixel_clock) { + DSSWARN("Could not find exact pixel clock. Requested %d kHz, " + "got %lu kHz\n", + t->pixel_clock, pck); + + t->pixel_clock = pck; + } + + + dispc_set_lcd_timings(t); + + r = dispc_set_clock_div(&cinfo); + if (r) + goto err2; + + if (!sdi.skip_init) { + dss_sdi_init(dssdev->phy.sdi.datapairs); + dss_sdi_enable(); + mdelay(2); + } + + dispc_enable_lcd_out(1); + + if (dssdev->driver->enable) { + r = dssdev->driver->enable(dssdev); + if (r) + goto err3; + } + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + sdi.skip_init = 0; + + return 0; +err3: + dispc_enable_lcd_out(0); +err2: + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); +err1: + omap_dss_stop_device(dssdev); +err0: + return r; +} + +static int sdi_display_resume(struct omap_dss_device *dssdev); + +static void sdi_display_disable(struct omap_dss_device *dssdev) +{ + if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED) + return; + + if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) + sdi_display_resume(dssdev); + + if (dssdev->driver->disable) + dssdev->driver->disable(dssdev); + + dispc_enable_lcd_out(0); + + dss_sdi_disable(); + + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); + sdi_pad_config(dssdev, 0); + + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; + + omap_dss_stop_device(dssdev); +} + +static int sdi_display_suspend(struct omap_dss_device *dssdev) +{ + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) + return -EINVAL; + + if (dssdev->driver->suspend) + dssdev->driver->suspend(dssdev); + + dispc_enable_lcd_out(0); + + dss_sdi_disable(); + + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); + sdi_pad_config(dssdev, 0); + + dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; + + return 0; +} + +static int sdi_display_resume(struct omap_dss_device *dssdev) +{ + if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) + return -EINVAL; + + sdi_pad_config(dssdev, 1); + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + + dss_sdi_enable(); + mdelay(2); + + dispc_enable_lcd_out(1); + + if (dssdev->driver->resume) + dssdev->driver->resume(dssdev); + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; +} + +static int sdi_display_set_update_mode(struct omap_dss_device *dssdev, + enum omap_dss_update_mode mode) +{ + if (mode == OMAP_DSS_UPDATE_MANUAL) + return -EINVAL; + + if (mode == OMAP_DSS_UPDATE_DISABLED) { + dispc_enable_lcd_out(0); + sdi.update_enabled = 0; + } else { + dispc_enable_lcd_out(1); + sdi.update_enabled = 1; + } + + return 0; +} + +static enum omap_dss_update_mode sdi_display_get_update_mode( + struct omap_dss_device *dssdev) +{ + return sdi.update_enabled ? OMAP_DSS_UPDATE_AUTO : + OMAP_DSS_UPDATE_DISABLED; +} + +static void sdi_get_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + *timings = dssdev->panel.timings; +} + +int sdi_init_display(struct omap_dss_device *dssdev) +{ + DSSDBG("SDI init\n"); + + dssdev->enable = sdi_display_enable; + dssdev->disable = sdi_display_disable; + dssdev->suspend = sdi_display_suspend; + dssdev->resume = sdi_display_resume; + dssdev->set_update_mode = sdi_display_set_update_mode; + dssdev->get_update_mode = sdi_display_get_update_mode; + dssdev->get_timings = sdi_get_timings; + + return sdi_pad_init(dssdev); +} + +int sdi_init(bool skip_init) +{ + /* we store this for first display enable, then clear it */ + sdi.skip_init = skip_init; + + /* + * Enable clocks already here, otherwise there would be a toggle + * of them until sdi_display_enable is called. + */ + if (skip_init) + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + return 0; +} + +void sdi_exit(void) +{ +} -- 1.6.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
