From: Eero Nurkkala <[email protected]> It is possible for GPIO IRQ lines configured with falling edge triggering only to get IRQs at the rising edge upon the exit of offmode. And vice versa. Prevent such IRQs to arrive by generating the IRQ obeying the detection scheme.
Signed-off-by: Eero Nurkkala <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> --- arch/arm/plat-omap/gpio.c | 27 +++++++++++++++++++++++---- 1 files changed, 23 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 555bab0..19d4dfb 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1804,7 +1804,7 @@ void omap2_gpio_resume_after_retention(void) return; for (i = 0; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; - u32 l; + u32 l, gen, gen0, gen1; if (!(bank->enabled_non_wakeup_gpios)) continue; @@ -1825,14 +1825,33 @@ void omap2_gpio_resume_after_retention(void) #endif l ^= bank->saved_datain; l &= bank->non_wakeup_gpios; - if (l) { + + /* + * No need to generate IRQs for the rising edge for gpio IRQs + * configured with falling edge only; and vice versa. + */ + gen0 = l & bank->saved_fallingdetect; + gen0 &= bank->saved_datain; + + gen1 = l & bank->saved_risingdetect; + gen1 &= ~(bank->saved_datain); + + /* FIXME: Consider GPIO IRQs with level detections properly! */ + gen = l & (~(bank->saved_fallingdetect) & + ~(bank->saved_risingdetect)); + /* Consider all GPIO IRQs needed to be updated */ + gen |= gen0 | gen1; + + if (gen) { u32 old0, old1; #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ defined(CONFIG_ARCH_OMAP4) old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1); + __raw_writel(old0 | gen, bank->base + + OMAP24XX_GPIO_LEVELDETECT0); + __raw_writel(old1 | gen, bank->base + + OMAP24XX_GPIO_LEVELDETECT1); __raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0); __raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1); #endif -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
