Kevin, > -----Original Message----- > From: [email protected] [mailto:linux-omap- > [email protected]] On Behalf Of Kevin Hilman > Sent: Thursday, August 13, 2009 11:53 AM > To: [email protected]; [email protected] > Cc: [email protected]; Tero Kristo > Subject: [PATCH 06/10] OMAP: PM debug: Add PRCM register dump support > > From: Tero Kristo <[email protected]> > > Allows dumping out current register contents from the debug filesystem, > and > also allows user to add arbitrary register save points into code. Current > register contents are available under debugfs at: > > [debugfs]/pm_debug/registers/current > > To add a save point, do following: > > From module init (or somewhere before the save call, called only once): > pm_dbg_init_regset(n); // n=1..4, allocates memory for dump area #n > > From arbitrary code location: > pm_dbg_regset_save(n); // n=1..4, saves registers to dump area #n > > After this, the register dump can be seen under > [debugfs]/pm_debug/registers/n > > Signed-off-by: Tero Kristo <[email protected]> > Signed-off-by: Kevin Hilman <[email protected]> > --- > arch/arm/mach-omap2/pm-debug.c | 208 > ++++++++++++++++++++++++++++++++++++++++ > arch/arm/mach-omap2/pm.h | 4 + > 2 files changed, 212 insertions(+), 0 deletions(-) > mode change 100644 => 100755 arch/arm/mach-omap2/pm-debug.c > mode change 100644 => 100755 arch/arm/mach-omap2/pm.h
I guess these 755 mode changes weren't intentional... :) Regards, Sergio -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
