Hemanth >-----Original Message----- >From: [email protected] >[mailto:[email protected]] On Behalf Of > > >>I am unable to boot from quad uart and if I try uart3 I get the below error > >For quad uart it stops after downloading kernel (ZOOM2 defconfig), probably >related to LL_DEBUG setting.
There are couple of problems that I found. The serial.c has recently changed and hence there is a change required in zoom2-debug file. And then there is the correct implementation for low level debug uart for zoom2. I have this work-in-progress patch at: git://dev.omapzoom.org/pub/scm/vikram/omap3.git zoom2_boot with this you can boot the zoom2 fine. Will post the patch series tomorrow. Reference combined patch [1] [1] http://dev.omapzoom.org/?p=vikram/omap3.git;a=commitdiff;h=81280ed52d20ef935e926e43d702ddf918d0f13c > >> >> <3>IP-Config: No network devices available. >> IP-Config: No network devices available. >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >> the body of a message to [email protected] >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> > >-- >To unsubscribe from this list: send the line "unsubscribe linux-omap" in >the body of a message to [email protected] >More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
