This patch assigns the physical address of debug uart as defined in menucoinfig item CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR to phys_io
The virtual address for io_pg_offset is calculated as per static mapping CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR is a hex value and for boards like Zoom2, the phy address can be zero, in case debug board is not attached. Signed-off-by: Vikram Pandita <[email protected]> --- arch/arm/mach-omap2/board-2430sdp.c | 4 ++-- arch/arm/mach-omap2/board-3430sdp.c | 4 ++-- arch/arm/mach-omap2/board-4430sdp.c | 4 ++-- arch/arm/mach-omap2/board-apollon.c | 4 ++-- arch/arm/mach-omap2/board-generic.c | 4 ++-- arch/arm/mach-omap2/board-h4.c | 4 ++-- arch/arm/mach-omap2/board-ldp.c | 4 ++-- arch/arm/mach-omap2/board-n8x0.c | 12 ++++++------ arch/arm/mach-omap2/board-omap3beagle.c | 4 ++-- arch/arm/mach-omap2/board-omap3evm.c | 4 ++-- arch/arm/mach-omap2/board-omap3pandora.c | 4 ++-- arch/arm/mach-omap2/board-overo.c | 4 ++-- arch/arm/mach-omap2/board-rx51.c | 4 ++-- arch/arm/mach-omap2/board-zoom2.c | 4 ++-- 14 files changed, 32 insertions(+), 32 deletions(-) diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index c693668..9ed2f2c 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -225,8 +225,8 @@ static void __init omap_2430sdp_map_io(void) MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_2430sdp_map_io, .init_irq = omap_2430sdp_init_irq, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index c71417f..f085eee 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -505,8 +505,8 @@ static void __init omap_3430sdp_map_io(void) MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_3430sdp_map_io, .init_irq = omap_3430sdp_init_irq, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 646079f..4c1a166 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -83,8 +83,8 @@ static void __init omap_4430sdp_map_io(void) MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_4430sdp_map_io, .init_irq = omap_4430sdp_init_irq, diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index e2947fd..61da659 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -336,8 +336,8 @@ static void __init omap_apollon_map_io(void) MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") /* Maintainer: Kyungmin Park <[email protected]> */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_apollon_map_io, .init_irq = omap_apollon_init_irq, diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index fc9eccb..6d39eaa 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -59,8 +59,8 @@ static void __init omap_generic_map_io(void) MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") /* Maintainer: Paul Mundt <[email protected]> */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR - OMAP1_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_generic_map_io, .init_irq = omap_generic_init_irq, diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 7eda321..4ce760f 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -379,8 +379,8 @@ static void __init omap_h4_map_io(void) MACHINE_START(OMAP_H4, "OMAP2420 H4 board") /* Maintainer: Paul Mundt <[email protected]> */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_h4_map_io, .init_irq = omap_h4_init_irq, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 4a4b300..5f06434 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -398,8 +398,8 @@ static void __init omap_ldp_map_io(void) } MACHINE_START(OMAP_LDP, "OMAP LDP board") - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_ldp_map_io, .init_irq = omap_ldp_init_irq, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index af6fcee..464b432 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -125,8 +125,8 @@ static void __init n8x0_init_machine(void) } MACHINE_START(NOKIA_N800, "Nokia N800") - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .init_irq = n8x0_init_irq, @@ -135,8 +135,8 @@ MACHINE_START(NOKIA_N800, "Nokia N800") MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .init_irq = n8x0_init_irq, @@ -145,8 +145,8 @@ MACHINE_START(NOKIA_N810, "Nokia N810") MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, .init_irq = n8x0_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 07aee90..4d30948 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -428,8 +428,8 @@ static void __init omap3_beagle_map_io(void) MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_beagle_map_io, .init_irq = omap3_beagle_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b3a080f..9157e3c 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -319,8 +319,8 @@ static void __init omap3_evm_map_io(void) MACHINE_START(OMAP3EVM, "OMAP3 EVM") /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_evm_map_io, .init_irq = omap3_evm_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1991f19..05d1994 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -412,8 +412,8 @@ static void __init omap3pandora_map_io(void) } MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3pandora_map_io, .init_irq = omap3pandora_init_irq, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index a9d7c2e..4057a1b 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -454,8 +454,8 @@ static void __init overo_map_io(void) } MACHINE_START(OVERO, "Gumstix Overo") - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = overo_map_io, .init_irq = overo_init_irq, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 8a3dc61..4b97fe8 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -88,8 +88,8 @@ static void __init rx51_map_io(void) MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen <[email protected]> */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = rx51_map_io, .init_irq = rx51_init_irq, diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 4d295d5..58baee3 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -280,8 +280,8 @@ static void __init omap_zoom2_map_io(void) } MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, + .io_pg_offst = ((ZOOM2_EXT_QUART_VIRT) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom2_map_io, .init_irq = omap_zoom2_init_irq, -- 1.6.3.3.334.g916e1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
