Hi Paul, Paul Walmsley <[email protected]> writes:
> Most board-*.c files read configuration data from the bootloader in > their .init_machine() function. This needs to happen earlier, at some > point before omap2_init_common_hw() is called. This is because a > future patch will use the bootloader serial console port information > to enable the UART clocks earlier, immediately after omap2_clk_init(). > This is in turn necessary since otherwise clock tree usecounts on > clocks like dpll4_m2x2_ck will be bogus, which can cause the > currently-active console UART clock to be disabled during boot. > > Signed-off-by: Paul Walmsley <[email protected]> > --- > arch/arm/mach-omap2/board-2430sdp.c | 17 ++++++++--------- > arch/arm/mach-omap2/board-3430sdp.c | 18 +++++++++--------- > arch/arm/mach-omap2/board-apollon.c | 20 ++++++++++---------- > arch/arm/mach-omap2/board-generic.c | 14 +++++++------- > arch/arm/mach-omap2/board-h4.c | 20 ++++++++++---------- > arch/arm/mach-omap2/board-ldp.c | 20 ++++++++++---------- > arch/arm/mach-omap2/board-omap3beagle.c | 26 +++++++++++++------------- > arch/arm/mach-omap2/board-omap3evm.c | 14 +++++++------- > arch/arm/mach-omap2/board-omap3pandora.c | 20 ++++++++++---------- > arch/arm/mach-omap2/board-overo.c | 20 ++++++++++---------- > arch/arm/mach-omap2/board-rx51.c | 4 ++-- > arch/arm/mach-omap2/board-zoom2.c | 18 +++++++++--------- > arch/arm/mach-omap2/io.c | 2 ++ > arch/arm/mach-omap2/serial.c | 14 +++++++++++++- > arch/arm/plat-omap/include/mach/serial.h | 3 +++ > 15 files changed, 123 insertions(+), 107 deletions(-) This one needs an update to apply on omap/master since Tony has done the serial init rework which touches all these board files as well :( Kevin > diff --git a/arch/arm/mach-omap2/board-2430sdp.c > b/arch/arm/mach-omap2/board-2430sdp.c > index 8ec2a13..06c644d 100644 > --- a/arch/arm/mach-omap2/board-2430sdp.c > +++ b/arch/arm/mach-omap2/board-2430sdp.c > @@ -139,13 +139,6 @@ static inline void board_smc91x_init(void) > > #endif > > -static void __init omap_2430sdp_init_irq(void) > -{ > - omap2_init_common_hw(NULL, NULL); > - omap_init_irq(); > - omap_gpio_init(); > -} > - > static struct omap_uart_config sdp2430_uart_config __initdata = { > .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), > }; > @@ -155,6 +148,14 @@ static struct omap_board_config_kernel sdp2430_config[] > = { > {OMAP_TAG_LCD, &sdp2430_lcd_config}, > }; > > +static void __init omap_2430sdp_init_irq(void) > +{ > + omap_board_config = sdp2430_config; > + omap_board_config_size = ARRAY_SIZE(sdp2430_config); > + omap2_init_common_hw(NULL, NULL); > + omap_init_irq(); > + omap_gpio_init(); > +} > > static struct twl4030_gpio_platform_data sdp2430_gpio_data = { > .gpio_base = OMAP_MAX_GPIO_LINES, > @@ -205,8 +206,6 @@ static void __init omap_2430sdp_init(void) > omap2430_i2c_init(); > > platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); > - omap_board_config = sdp2430_config; > - omap_board_config_size = ARRAY_SIZE(sdp2430_config); > omap_serial_init(); > twl4030_mmc_init(mmc); > usb_musb_init(); > diff --git a/arch/arm/mach-omap2/board-3430sdp.c > b/arch/arm/mach-omap2/board-3430sdp.c > index ac262cd..e51c124 100644 > --- a/arch/arm/mach-omap2/board-3430sdp.c > +++ b/arch/arm/mach-omap2/board-3430sdp.c > @@ -167,13 +167,6 @@ static struct platform_device *sdp3430_devices[] > __initdata = { > &sdp3430_lcd_device, > }; > > -static void __init omap_3430sdp_init_irq(void) > -{ > - omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL); > - omap_init_irq(); > - omap_gpio_init(); > -} > - > static struct omap_uart_config sdp3430_uart_config __initdata = { > .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), > }; > @@ -187,6 +180,15 @@ static struct omap_board_config_kernel sdp3430_config[] > __initdata = { > { OMAP_TAG_LCD, &sdp3430_lcd_config }, > }; > > +static void __init omap_3430sdp_init_irq(void) > +{ > + omap_board_config = sdp3430_config; > + omap_board_config_size = ARRAY_SIZE(sdp3430_config); > + omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL); > + omap_init_irq(); > + omap_gpio_init(); > +} > + > static int sdp3430_batt_table[] = { > /* 0 C*/ > 30800, 29500, 28300, 27100, > @@ -482,8 +484,6 @@ static void __init omap_3430sdp_init(void) > { > omap3430_i2c_init(); > platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices)); > - omap_board_config = sdp3430_config; > - omap_board_config_size = ARRAY_SIZE(sdp3430_config); > if (omap_rev() > OMAP3430_REV_ES1_0) > ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2; > else > diff --git a/arch/arm/mach-omap2/board-apollon.c > b/arch/arm/mach-omap2/board-apollon.c > index dcfc20d..8e063ba 100644 > --- a/arch/arm/mach-omap2/board-apollon.c > +++ b/arch/arm/mach-omap2/board-apollon.c > @@ -248,14 +248,6 @@ out: > clk_put(gpmc_fck); > } > > -static void __init omap_apollon_init_irq(void) > -{ > - omap2_init_common_hw(NULL, NULL); > - omap_init_irq(); > - omap_gpio_init(); > - apollon_init_smc91x(); > -} > - > static struct omap_uart_config apollon_uart_config __initdata = { > .enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2), > }; > @@ -276,6 +268,16 @@ static struct omap_board_config_kernel apollon_config[] > = { > { OMAP_TAG_LCD, &apollon_lcd_config }, > }; > > +static void __init omap_apollon_init_irq(void) > +{ > + omap_board_config = apollon_config; > + omap_board_config_size = ARRAY_SIZE(apollon_config); > + omap2_init_common_hw(NULL, NULL); > + omap_init_irq(); > + omap_gpio_init(); > + apollon_init_smc91x(); > +} > + > static void __init apollon_led_init(void) > { > /* LED0 - AA10 */ > @@ -324,8 +326,6 @@ static void __init omap_apollon_init(void) > * if not needed. > */ > platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices)); > - omap_board_config = apollon_config; > - omap_board_config_size = ARRAY_SIZE(apollon_config); > omap_serial_init(); > } > > diff --git a/arch/arm/mach-omap2/board-generic.c > b/arch/arm/mach-omap2/board-generic.c > index fd00aa0..ef0dc67 100644 > --- a/arch/arm/mach-omap2/board-generic.c > +++ b/arch/arm/mach-omap2/board-generic.c > @@ -31,12 +31,6 @@ > #include <mach/board.h> > #include <mach/common.h> > > -static void __init omap_generic_init_irq(void) > -{ > - omap2_init_common_hw(NULL, NULL); > - omap_init_irq(); > -} > - > static struct omap_uart_config generic_uart_config __initdata = { > .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), > }; > @@ -45,10 +39,16 @@ static struct omap_board_config_kernel generic_config[] = > { > { OMAP_TAG_UART, &generic_uart_config }, > }; > > -static void __init omap_generic_init(void) > +static void __init omap_generic_init_irq(void) > { > omap_board_config = generic_config; > omap_board_config_size = ARRAY_SIZE(generic_config); > + omap2_init_common_hw(NULL, NULL); > + omap_init_irq(); > +} > + > +static void __init omap_generic_init(void) > +{ > omap_serial_init(); > } > > diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c > index 7b1d61d..66f710e 100644 > --- a/arch/arm/mach-omap2/board-h4.c > +++ b/arch/arm/mach-omap2/board-h4.c > @@ -268,14 +268,6 @@ static void __init h4_init_flash(void) > h4_flash_resource.end = base + SZ_64M - 1; > } > > -static void __init omap_h4_init_irq(void) > -{ > - omap2_init_common_hw(NULL, NULL); > - omap_init_irq(); > - omap_gpio_init(); > - h4_init_flash(); > -} > - > static struct omap_uart_config h4_uart_config __initdata = { > .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), > }; > @@ -322,6 +314,16 @@ static struct omap_board_config_kernel h4_config[] = { > { OMAP_TAG_LCD, &h4_lcd_config }, > }; > > +static void __init omap_h4_init_irq(void) > +{ > + omap_board_config = h4_config; > + omap_board_config_size = ARRAY_SIZE(h4_config); > + omap2_init_common_hw(NULL, NULL); > + omap_init_irq(); > + omap_gpio_init(); > + h4_init_flash(); > +} > + > static struct at24_platform_data m24c01 = { > .byte_len = SZ_1K / 8, > .page_size = 16, > @@ -366,8 +368,6 @@ static void __init omap_h4_init(void) > ARRAY_SIZE(h4_i2c_board_info)); > > platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); > - omap_board_config = h4_config; > - omap_board_config_size = ARRAY_SIZE(h4_config); > omap_usb_init(&h4_usb_config); > omap_serial_init(); > } > diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c > index ea383f8..cc64aa7 100644 > --- a/arch/arm/mach-omap2/board-ldp.c > +++ b/arch/arm/mach-omap2/board-ldp.c > @@ -268,14 +268,6 @@ static inline void __init ldp_init_smsc911x(void) > gpio_direction_input(eth_gpio); > } > > -static void __init omap_ldp_init_irq(void) > -{ > - omap2_init_common_hw(NULL, NULL); > - omap_init_irq(); > - omap_gpio_init(); > - ldp_init_smsc911x(); > -} > - > static struct omap_uart_config ldp_uart_config __initdata = { > .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), > }; > @@ -294,6 +286,16 @@ static struct omap_board_config_kernel ldp_config[] > __initdata = { > { OMAP_TAG_LCD, &ldp_lcd_config }, > }; > > +static void __init omap_ldp_init_irq(void) > +{ > + omap_board_config = ldp_config; > + omap_board_config_size = ARRAY_SIZE(ldp_config); > + omap2_init_common_hw(NULL, NULL); > + omap_init_irq(); > + omap_gpio_init(); > + ldp_init_smsc911x(); > +} > + > static struct twl4030_usb_data ldp_usb_data = { > .usb_mode = T2_USB_MODE_ULPI, > }; > @@ -377,8 +379,6 @@ static void __init omap_ldp_init(void) > { > omap_i2c_init(); > platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); > - omap_board_config = ldp_config; > - omap_board_config_size = ARRAY_SIZE(ldp_config); > ts_gpio = 54; > ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio); > spi_register_board_info(ldp_spi_board_info, > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c > b/arch/arm/mach-omap2/board-omap3beagle.c > index e00ba12..f74358a 100644 > --- a/arch/arm/mach-omap2/board-omap3beagle.c > +++ b/arch/arm/mach-omap2/board-omap3beagle.c > @@ -280,17 +280,6 @@ static int __init omap3_beagle_i2c_init(void) > return 0; > } > > -static void __init omap3_beagle_init_irq(void) > -{ > - omap2_init_common_hw(mt46h32m32lf6_sdrc_params, > - mt46h32m32lf6_sdrc_params); > - omap_init_irq(); > -#ifdef CONFIG_OMAP_32K_TIMER > - omap2_gp_clockevent_set_gptimer(12); > -#endif > - omap_gpio_init(); > -} > - > static struct gpio_led gpio_leds[] = { > { > .name = "beagleboard::usr0", > @@ -349,6 +338,19 @@ static struct omap_board_config_kernel > omap3_beagle_config[] __initdata = { > { OMAP_TAG_LCD, &omap3_beagle_lcd_config }, > }; > > +static void __init omap3_beagle_init_irq(void) > +{ > + omap_board_config = omap3_beagle_config; > + omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); > + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, > + mt46h32m32lf6_sdrc_params); > + omap_init_irq(); > +#ifdef CONFIG_OMAP_32K_TIMER > + omap2_gp_clockevent_set_gptimer(12); > +#endif > + omap_gpio_init(); > +} > + > static struct platform_device *omap3_beagle_devices[] __initdata = { > &omap3_beagle_lcd_device, > &leds_gpio, > @@ -398,8 +400,6 @@ static void __init omap3_beagle_init(void) > omap3_beagle_i2c_init(); > platform_add_devices(omap3_beagle_devices, > ARRAY_SIZE(omap3_beagle_devices)); > - omap_board_config = omap3_beagle_config; > - omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); > omap_serial_init(); > > omap_cfg_reg(J25_34XX_GPIO170); > diff --git a/arch/arm/mach-omap2/board-omap3evm.c > b/arch/arm/mach-omap2/board-omap3evm.c > index c4b1446..067d2bc 100644 > --- a/arch/arm/mach-omap2/board-omap3evm.c > +++ b/arch/arm/mach-omap2/board-omap3evm.c > @@ -278,19 +278,21 @@ struct spi_board_info omap3evm_spi_board_info[] = { > }, > }; > > +static struct omap_board_config_kernel omap3_evm_config[] __initdata = { > + { OMAP_TAG_UART, &omap3_evm_uart_config }, > + { OMAP_TAG_LCD, &omap3_evm_lcd_config }, > +}; > + > static void __init omap3_evm_init_irq(void) > { > + omap_board_config = omap3_evm_config; > + omap_board_config_size = ARRAY_SIZE(omap3_evm_config); > omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL); > omap_init_irq(); > omap_gpio_init(); > omap3evm_init_smc911x(); > } > > -static struct omap_board_config_kernel omap3_evm_config[] __initdata = { > - { OMAP_TAG_UART, &omap3_evm_uart_config }, > - { OMAP_TAG_LCD, &omap3_evm_lcd_config }, > -}; > - > static struct platform_device *omap3_evm_devices[] __initdata = { > &omap3_evm_lcd_device, > &omap3evm_smc911x_device, > @@ -301,8 +303,6 @@ static void __init omap3_evm_init(void) > omap3_evm_i2c_init(); > > platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices)); > - omap_board_config = omap3_evm_config; > - omap_board_config_size = ARRAY_SIZE(omap3_evm_config); > > spi_register_board_info(omap3evm_spi_board_info, > ARRAY_SIZE(omap3evm_spi_board_info)); > diff --git a/arch/arm/mach-omap2/board-omap3pandora.c > b/arch/arm/mach-omap2/board-omap3pandora.c > index 864ee3d..4958d94 100644 > --- a/arch/arm/mach-omap2/board-omap3pandora.c > +++ b/arch/arm/mach-omap2/board-omap3pandora.c > @@ -309,14 +309,6 @@ static int __init omap3pandora_i2c_init(void) > return 0; > } > > -static void __init omap3pandora_init_irq(void) > -{ > - omap2_init_common_hw(mt46h32m32lf6_sdrc_params, > - mt46h32m32lf6_sdrc_params); > - omap_init_irq(); > - omap_gpio_init(); > -} > - > static void __init omap3pandora_ads7846_init(void) > { > int gpio = OMAP3_PANDORA_TS_GPIO; > @@ -380,6 +372,16 @@ static struct omap_board_config_kernel > omap3pandora_config[] __initdata = { > { OMAP_TAG_LCD, &omap3pandora_lcd_config }, > }; > > +static void __init omap3pandora_init_irq(void) > +{ > + omap_board_config = omap3pandora_config; > + omap_board_config_size = ARRAY_SIZE(omap3pandora_config); > + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, > + mt46h32m32lf6_sdrc_params); > + omap_init_irq(); > + omap_gpio_init(); > +} > + > static struct platform_device *omap3pandora_devices[] __initdata = { > &omap3pandora_lcd_device, > &pandora_leds_gpio, > @@ -391,8 +393,6 @@ static void __init omap3pandora_init(void) > omap3pandora_i2c_init(); > platform_add_devices(omap3pandora_devices, > ARRAY_SIZE(omap3pandora_devices)); > - omap_board_config = omap3pandora_config; > - omap_board_config_size = ARRAY_SIZE(omap3pandora_config); > omap_serial_init(); > spi_register_board_info(omap3pandora_spi_board_info, > ARRAY_SIZE(omap3pandora_spi_board_info)); > diff --git a/arch/arm/mach-omap2/board-overo.c > b/arch/arm/mach-omap2/board-overo.c > index 6bce230..a44aa13 100644 > --- a/arch/arm/mach-omap2/board-overo.c > +++ b/arch/arm/mach-omap2/board-overo.c > @@ -360,14 +360,6 @@ static int __init overo_i2c_init(void) > return 0; > } > > -static void __init overo_init_irq(void) > -{ > - omap2_init_common_hw(mt46h32m32lf6_sdrc_params, > - mt46h32m32lf6_sdrc_params); > - omap_init_irq(); > - omap_gpio_init(); > -} > - > static struct platform_device overo_lcd_device = { > .name = "overo_lcd", > .id = -1, > @@ -382,6 +374,16 @@ static struct omap_board_config_kernel overo_config[] > __initdata = { > { OMAP_TAG_LCD, &overo_lcd_config }, > }; > > +static void __init overo_init_irq(void) > +{ > + omap_board_config = overo_config; > + omap_board_config_size = ARRAY_SIZE(overo_config); > + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, > + mt46h32m32lf6_sdrc_params); > + omap_init_irq(); > + omap_gpio_init(); > +} > + > static struct platform_device *overo_devices[] __initdata = { > &overo_lcd_device, > }; > @@ -390,8 +392,6 @@ static void __init overo_init(void) > { > overo_i2c_init(); > platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); > - omap_board_config = overo_config; > - omap_board_config_size = ARRAY_SIZE(overo_config); > omap_serial_init(); > overo_flash_init(); > usb_musb_init(); > diff --git a/arch/arm/mach-omap2/board-rx51.c > b/arch/arm/mach-omap2/board-rx51.c > index 1c9e07f..5a0f83e 100644 > --- a/arch/arm/mach-omap2/board-rx51.c > +++ b/arch/arm/mach-omap2/board-rx51.c > @@ -61,6 +61,8 @@ static struct omap_board_config_kernel rx51_config[] = { > > static void __init rx51_init_irq(void) > { > + omap_board_config = rx51_config; > + omap_board_config_size = ARRAY_SIZE(rx51_config); > omap2_init_common_hw(NULL, NULL); > omap_init_irq(); > omap_gpio_init(); > @@ -70,8 +72,6 @@ extern void __init rx51_peripherals_init(void); > > static void __init rx51_init(void) > { > - omap_board_config = rx51_config; > - omap_board_config_size = ARRAY_SIZE(rx51_config); > omap_serial_init(); > usb_musb_init(); > rx51_peripherals_init(); > diff --git a/arch/arm/mach-omap2/board-zoom2.c > b/arch/arm/mach-omap2/board-zoom2.c > index 427b7b8..df36b46 100644 > --- a/arch/arm/mach-omap2/board-zoom2.c > +++ b/arch/arm/mach-omap2/board-zoom2.c > @@ -23,13 +23,6 @@ > > #include "mmc-twl4030.h" > > -static void __init omap_zoom2_init_irq(void) > -{ > - omap2_init_common_hw(NULL, NULL); > - omap_init_irq(); > - omap_gpio_init(); > -} > - > static struct omap_uart_config zoom2_uart_config __initdata = { > .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), > }; > @@ -38,6 +31,15 @@ static struct omap_board_config_kernel zoom2_config[] > __initdata = { > { OMAP_TAG_UART, &zoom2_uart_config }, > }; > > +static void __init omap_zoom2_init_irq(void) > +{ > + omap_board_config = zoom2_config; > + omap_board_config_size = ARRAY_SIZE(zoom2_config); > + omap2_init_common_hw(NULL, NULL); > + omap_init_irq(); > + omap_gpio_init(); > +} > + > static struct twl4030_gpio_platform_data zoom2_gpio_data = { > .gpio_base = OMAP_MAX_GPIO_LINES, > .irq_base = TWL4030_GPIO_IRQ_BASE, > @@ -85,8 +87,6 @@ extern int __init omap_zoom2_debugboard_init(void); > static void __init omap_zoom2_init(void) > { > omap_i2c_init(); > - omap_board_config = zoom2_config; > - omap_board_config_size = ARRAY_SIZE(zoom2_config); > omap_serial_init(); > omap_zoom2_debugboard_init(); > twl4030_mmc_init(mmc); > diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c > index 4bfe873..470b1d1 100644 > --- a/arch/arm/mach-omap2/io.c > +++ b/arch/arm/mach-omap2/io.c > @@ -32,6 +32,7 @@ > #include <mach/sram.h> > #include <mach/sdrc.h> > #include <mach/gpmc.h> > +#include <mach/serial.h> > > #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ > #include "clock.h" > @@ -287,6 +288,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params > *sdrc_cs0, > pwrdm_init(powerdomains_omap); > clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); > omap2_clk_init(); > + omap_serial_early_init(); > omap_pm_if_init(); > omap2_sdrc_init(sdrc_cs0, sdrc_cs1); > _omap2_init_reprogram_sdrc(); > diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c > index a7421a5..098ac58 100644 > --- a/arch/arm/mach-omap2/serial.c > +++ b/arch/arm/mach-omap2/serial.c > @@ -552,7 +552,7 @@ static struct omap_uart_state > omap_uart[OMAP_MAX_NR_PORTS] = { > }, > }; > > -void __init omap_serial_init(void) > +void __init omap_serial_early_init(void) > { > int i; > const struct omap_uart_config *info; > @@ -607,6 +607,18 @@ void __init omap_serial_init(void) > p->irq += 32; > > omap_uart_enable_clocks(uart); > + } > +} > + > +void __init omap_serial_init(void) > +{ > + int i; > + > + for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { > + struct omap_uart_state *uart = &omap_uart[i]; > + struct platform_device *pdev = &uart->pdev; > + struct device *dev = &pdev->dev; > + > omap_uart_reset(uart); > omap_uart_idle_init(uart); > > diff --git a/arch/arm/plat-omap/include/mach/serial.h > b/arch/arm/plat-omap/include/mach/serial.h > index def0529..e249186 100644 > --- a/arch/arm/plat-omap/include/mach/serial.h > +++ b/arch/arm/plat-omap/include/mach/serial.h > @@ -13,6 +13,8 @@ > #ifndef __ASM_ARCH_SERIAL_H > #define __ASM_ARCH_SERIAL_H > > +#include <linux/init.h> > + > #if defined(CONFIG_ARCH_OMAP1) > /* OMAP1 serial ports */ > #define OMAP_UART1_BASE 0xfffb0000 > @@ -53,6 +55,7 @@ > }) > > #ifndef __ASSEMBLER__ > +extern void __init omap_serial_early_init(void); > extern void omap_serial_init(void); > extern int omap_uart_can_sleep(void); > extern void omap_uart_check_wakeup(void); > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-arm" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
