Hi Charu,
On Wed, Aug 12, 2009 at 9:15 PM, <[email protected]> wrote:
> Triton2 RTC code changes for fixing periodic interrupt feature in RTC.
> rtc-twlcore.c does initialisation of the msecure gpio pin.
> Board files indicate msecure gpio line through twl4030 platform data.
> twl4030-core.c passes this information to RTC driver.
> Board files does msecure gpio mux configuration.
>
>
> Signed-off-by: Charulatha V <[email protected]>
> ---
> drivers/rtc/rtc-twl4030.c | 63
> ++++++++++++++++++++++++++++++++++++++++++++-
> 1 files changed, 62 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c
> index 9c8c70c..614adf0 100644
> --- a/drivers/rtc/rtc-twl4030.c
> +++ b/drivers/rtc/rtc-twl4030.c
> @@ -29,7 +29,12 @@
> #include <linux/interrupt.h>
>
> #include <linux/i2c/twl4030.h>
> +#include <linux/gpio.h>
>
> +/*
> + * To find if the value is a power of two
> + */
> +#define is_power_of_two(x) (!((x) & ((x)-1)))
>
There is already is_power_of_2 or something like that in kernel,
please don't re-define. Probably check bits related code.
> /*
> * RTC block register offsets (use TWL_MODULE_RTC)
> @@ -86,6 +91,37 @@
> /*----------------------------------------------------------------------*/
>
> /*
> + * msecure line initialisation for TWL4030 RTC registers write access
> + */
> +static int msecure_init(struct twl4030_rtc_platform_data *pdata)
> +{
> + int ret = 0;
> + if (pdata == NULL)
> + goto out;
> +
> + ret = gpio_request(pdata->msecure_gpio, "msecure");
> + if (ret < 0) {
> + pr_err("twl4030_rtc: can't reserve msecure GPIO:%d !\n"
> + "RTC functionality will not be available\n",
> + pdata->msecure_gpio);
> + goto out;
> + }
> + /*
> + * TWL4030 will be in secure mode if msecure line from OMAP is low.
> + * Make msecure line high in order to change the TWL4030 RTC time
> + * and calender registers.
> + */
> + ret = gpio_direction_output(pdata->msecure_gpio, 1);
> + if (ret < 0)
> + pr_err("twl4030_rtc: can't set msecure GPIO direction:%d !\n"
> + "RTC functionality will not be available\n",
> + pdata->msecure_gpio);
> +
> +out:
> + return ret;
> +}
> +
> +/*
> * Supports 1 byte read from TWL4030 RTC register.
> */
> static int twl4030_rtc_read_u8(u8 *data, u8 reg)
> @@ -128,7 +164,6 @@ static int set_rtc_irq_bit(unsigned char bit)
> int ret;
>
> val = rtc_irq_bits | bit;
> - val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
> ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
> if (ret == 0)
> rtc_irq_bits = val;
> @@ -318,6 +353,25 @@ out:
> return ret;
> }
>
> +static int twl4030_rtc_irq_set_freq(struct device *dev, int freq)
> +{
> + int ret, val = 1;
> + int regbit = 0;
> +
> + if ((!is_power_of_2(freq)) || (freq > 8) || (freq <= 0))
> + return -EINVAL;
> +
> + while ((freq & val) == 0) {
> + val = val << 1;
> + regbit++;
> + }
> + ret = set_rtc_irq_bit(regbit);
> + if (ret)
> + dev_err(dev, "rtc_irq_set_freq error %d\n", ret);
> +
> + return ret;
> +}
> +
> static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
> {
> unsigned long events = 0;
> @@ -383,6 +437,7 @@ static struct rtc_class_ops twl4030_rtc_ops = {
> .set_alarm = twl4030_rtc_set_alarm,
> .alarm_irq_enable = twl4030_rtc_alarm_irq_enable,
> .update_irq_enable = twl4030_rtc_update_irq_enable,
> + .irq_set_freq = twl4030_rtc_irq_set_freq,
> };
>
> /*----------------------------------------------------------------------*/
> @@ -390,13 +445,19 @@ static struct rtc_class_ops twl4030_rtc_ops = {
> static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
> {
> struct rtc_device *rtc;
> + struct twl4030_rtc_platform_data *pdata = pdev->dev.platform_data;
> int ret = 0;
> int irq = platform_get_irq(pdev, 0);
> +
> u8 rd_reg;
>
> if (irq <= 0)
> return -EINVAL;
>
> + ret = msecure_init(pdata);
> + if (ret)
> + goto out0;
> +
> rtc = rtc_device_register(pdev->name,
> &pdev->dev, &twl4030_rtc_ops, THIS_MODULE);
> if (IS_ERR(rtc)) {
> --
> 1.6.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
---Trilok Soni
http://triloksoni.wordpress.com
http://www.linkedin.com/in/triloksoni
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
