* Janusz Krzysztofik <jkrzy...@tis.icnet.pl> [090818 16:20]:
> Tony Lindgren wrote:
>> From: Janusz Krzysztofik <jkrzy...@tis.icnet.pl>
>>
>> This patch adds support for modem device found on Amstrad E3 (Delta) board.
>>
>> Based on earlier patch by Jonathan McDowell, available at
>> http://the.earth.li/pub/e3/2.6.19/ams-delta-modem.patch.
>> Modified after Ladislav Michl's arch/arm/mach-omap1/board-voiceblue.c.
>>
>> This patch is dependent on 8250 driver changes getting accepted upstream:
>> http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7
>>
>> Signed-off-by: Janusz Krzysztofik <jkrzy...@tis.icnet.pl>
>> Signed-off-by: Tony Lindgren <t...@atomide.com>
>> ---
>>  arch/arm/mach-omap1/board-ams-delta.c |   38 
>> +++++++++++++++++++++++++++++++++
>>  1 files changed, 38 insertions(+), 0 deletions(-)
>>
> Russel,
>
> Unlike all others from the series, this one got no single comment from  
> you, niether your "OK" nor anything else. I'm not sure what that could  
> mean, but if there is still something I can do to help getting it into  
> 2.6.32, please let me know.

I've queued this series into omap for-next branch along with other omap
code going upstream.

Regards,

Tony


>
> Thanks,
> Janusz
>
>> diff --git a/arch/arm/mach-omap1/board-ams-delta.c 
>> b/arch/arm/mach-omap1/board-ams-delta.c
>> index db4d9a4..40dfa63 100644
>> --- a/arch/arm/mach-omap1/board-ams-delta.c
>> +++ b/arch/arm/mach-omap1/board-ams-delta.c
>> @@ -15,8 +15,11 @@
>>  #include <linux/kernel.h>
>>  #include <linux/init.h>
>>  #include <linux/input.h>
>> +#include <linux/interrupt.h>
>>  #include <linux/platform_device.h>
>> +#include <linux/serial_8250.h>
>>  +#include <asm/serial.h>
>>  #include <mach/hardware.h>
>>  #include <asm/mach-types.h>
>>  #include <asm/mach/arch.h>
>> @@ -234,6 +237,41 @@ static void __init ams_delta_init(void)
>>      platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
>>  }
>>  +static struct plat_serial8250_port ams_delta_modem_ports[] = {
>> +    {
>> +            .membase        = (void *) AMS_DELTA_MODEM_VIRT,
>> +            .mapbase        = AMS_DELTA_MODEM_PHYS,
>> +            .irq            = -EINVAL, /* changed later */
>> +            .flags          = UPF_BOOT_AUTOCONF,
>> +            .irqflags       = IRQF_TRIGGER_RISING,
>> +            .iotype         = UPIO_MEM,
>> +            .regshift       = 1,
>> +            .uartclk        = BASE_BAUD * 16,
>> +    },
>> +    { },
>> +};
>> +
>> +static struct platform_device ams_delta_modem_device = {
>> +    .name   = "serial8250",
>> +    .id     = PLAT8250_DEV_PLATFORM1,
>> +    .dev            = {
>> +            .platform_data = ams_delta_modem_ports,
>> +    },
>> +};
>> +
>> +static int __init ams_delta_modem_init(void)
>> +{
>> +    omap_cfg_reg(M14_1510_GPIO2);
>> +    ams_delta_modem_ports[0].irq = gpio_to_irq(2);
>> +
>> +    ams_delta_latch2_write(
>> +            AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
>> +            AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
>> +
>> +    return platform_device_register(&ams_delta_modem_device);
>> +}
>> +arch_initcall(ams_delta_modem_init);
>> +
>>  static void __init ams_delta_map_io(void)
>>  {
>>      omap1_map_common_io();
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majord...@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to