Petazzoni/Vimal >-----Original Message----- >From: [email protected] >[mailto:[email protected]] On Behalf Of Maxime >Petazzoni >Sent: Thursday, August 27, 2009 7:00 AM >To: [email protected] >Subject: [PATCH] OMAP3: Zoom2: provide default MTD partitions > >This change introduces default MTD partitions for the Zoom-II board >NAND, inspired by the OMAP3 Beagle partitions and the OMAP3 Zoom2 >partitions defined in OmapZoom.org's OMAP kernel.
Thanks for putting this together for zoom2, however I NAK for now. Why? I know of an implementation by Vimal Singh that introduces a common flash file for Zoom1 and Zoom2. There is reuse of code there. I have attached the patch by Vimal here (in-lining would be difficult) Please discuss and get a converged approach on handling NAND partitions on Zoom1 and Zoom2. Also the Systerm/User/Cache partition definitions are more from Android perspective. Given that each system may have a different NAND partition requirement, have you looked at bootargs passing the MTD partition info: Eg: mtdparts=omap2-nand.0:5...@0(xloader),\ 15...@512k(bootloader),\ 2...@2m(kernel),\ 1...@32m(system),\ 3...@192m(userdata),\ 3...@224m(cache) Lets discuss the final approach on this list and try to close this soon. Thnx > >The size of the U-Boot environment partition was increased to 1MB, as >the previously smaller partition couldn't contain the U-Boot environment >correctly (erasing the next partition would erase the U-Boot env as >well). > >Finally, the "system" partition gets an increased size of 256MB to take >advantage of the size of the flash on the Zoom-II board. > >Signed-off-by: Maxime Petazzoni <[email protected]> >--- > arch/arm/mach-omap2/board-zoom2.c | 86 +++++++++++++++++++++++++++++++++++++ > 1 files changed, 86 insertions(+), 0 deletions(-) > >diff --git a/arch/arm/mach-omap2/board-zoom2.c >b/arch/arm/mach-omap2/board-zoom2.c >index 4d295d5..ce5a4d8 100644 >--- a/arch/arm/mach-omap2/board-zoom2.c >+++ b/arch/arm/mach-omap2/board-zoom2.c >@@ -16,16 +16,101 @@ > #include <linux/gpio.h> > #include <linux/i2c/twl4030.h> > #include <linux/regulator/machine.h> >+#include <linux/mtd/mtd.h> >+#include <linux/mtd/partitions.h> >+#include <linux/mtd/nand.h> > > #include <asm/mach-types.h> > #include <asm/mach/arch.h> > > #include <mach/common.h> >+#include <mach/nand.h> > #include <mach/usb.h> > #include <mach/keypad.h> > > #include "mmc-twl4030.h" > >+#define LDP3430_NAND_CS 0 >+#define GPMC_CS0_BASE 0x60 >+#define GPMC_CS_SIZE 0x30 >+ >+static struct mtd_partition zoom2_nand_partitions[] = { >+ { >+ .name = "X-Loader-NAND", >+ .offset = 0, >+ .size = 4 * (64 * 2048), /* 512kB */ >+ .mask_flags = MTD_WRITEABLE, /* force read-only */ >+ }, >+ { >+ .name = "U-Boot-NAND", >+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ >+ .size = 4 * (64 * 2048), /* 512kB */ >+ .mask_flags = MTD_WRITEABLE, /* force read-only */ >+ }, >+ { >+ .name = "Boot Env-NAND", >+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x100000 */ >+ .size = 8 * (64 * 2048), /* 1MB */ >+ }, >+ { >+ .name = "Kernel-NAND", >+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x200000 */ >+ .size = 32 * (64 * 2048), /* 4MB */ >+ }, >+ { >+ .name = "system", >+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x600000 */ >+ .size = 2048 * (64 * 2048), /* 256MB */ >+ }, >+ { >+ .name = "userdata", >+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x10600000 >*/ >+ .size = 512 * (64 * 2048), /* 64MB */ >+ }, >+ { >+ .name = "cache", >+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x14600000 >*/ >+ .size = 512 * (64 * 2048), /* 64MB */ >+ }, >+}; >+ >+/* NAND chip access: 16 bit */ >+static struct omap_nand_platform_data zoom2_nand_data = { >+ .parts = zoom2_nand_partitions, >+ .nr_parts = ARRAY_SIZE(zoom2_nand_partitions), >+ .nand_setup = NULL, >+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */ >+ .dev_ready = NULL, >+}; >+ >+static struct resource zoom2_nand_resource = { >+ .flags = IORESOURCE_MEM, >+}; >+ >+static struct platform_device zoom2_nand_device = { >+ .name = "omap2-nand", >+ .id = 0, >+ .dev = { >+ .platform_data = &zoom2_nand_data, >+ }, >+ .num_resources = 1, >+ .resource = &zoom2_nand_resource, >+}; >+ >+static void __init zoom2_flash_init(void) >+{ >+ u8 nandcs = LDP3430_NAND_CS; >+ u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; >+ >+ zoom2_nand_data.cs = nandcs; >+ zoom2_nand_data.gpmc_cs_baseaddr = (void *)(gpmc_base_add + >+ GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); >+ zoom2_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); >+ >+ if (platform_device_register(&zoom2_nand_device) < 0) >+ printk(KERN_ERR "Unable to register NAND device!\n"); >+} >+ > /* Zoom2 has Qwerty keyboard*/ > static int zoom2_twl4030_keymap[] = { > KEY(0, 0, KEY_E), >@@ -271,6 +356,7 @@ static void __init omap_zoom2_init(void) > omap_serial_init(&zoom2_uart_config); > omap_zoom2_debugboard_init(); > usb_musb_init(); >+ zoom2_flash_init(); > } > > static void __init omap_zoom2_map_io(void) >-- >1.6.3.3.210.g29cb3 > >-- >To unsubscribe from this list: send the line "unsubscribe linux-omap" in >the body of a message to [email protected] >More majordomo info at http://vger.kernel.org/majordomo-info.html
add_nand_support_zoom2.patch
Description: add_nand_support_zoom2.patch
