* Steve Sakoman <[email protected]> [090816 14:30]: > Overo uses port 2, not port 1. Use OVERO_GPIO_USBH_NRESET rather than > hard coded value > > Note: this alone will not give functional EHCI. Also required is: > > [PATCH 4/9] ehci: fix phy_reset init in ehci probe > from Ajay Kumar Gupta
I've piled up all the ehci patches into ehci branch while waiting for somebody to start sending these to the linux-usb list. That branch is now merged into the master branch for testing. The patch "ehci: portwise configurations" changed the usb_ehci_init() interface, but looks like it did not include the overo config.. Care to update your pending overo and beagle ehci patches for that? It might take a little while for the mirrors to get updated, as I just pushed the updated branches. Regards, Tony > Signed-off-by: Steve Sakoman <[email protected]> > --- > arch/arm/mach-omap2/board-overo.c | 11 ++--------- > 1 files changed, 2 insertions(+), 9 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-overo.c > b/arch/arm/mach-omap2/board-overo.c > index a9d7c2e..a220a54 100644 > --- a/arch/arm/mach-omap2/board-overo.c > +++ b/arch/arm/mach-omap2/board-overo.c > @@ -394,7 +394,8 @@ static void __init overo_init(void) > omap_serial_init(&overo_uart_config); > overo_flash_init(); > usb_musb_init(); > - usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true, 183, -EINVAL); > + usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true, > + -EINVAL, OVERO_GPIO_USBH_NRESET); > overo_ads7846_init(); > overo_init_smsc911x(); > > @@ -437,14 +438,6 @@ static void __init overo_init(void) > else > printk(KERN_ERR "could not obtain gpio for " > "OVERO_GPIO_USBH_CPEN\n"); > - > - if ((gpio_request(OVERO_GPIO_USBH_NRESET, > - "OVERO_GPIO_USBH_NRESET") == 0) && > - (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0)) > - gpio_export(OVERO_GPIO_USBH_NRESET, 0); > - else > - printk(KERN_ERR "could not obtain gpio for " > - "OVERO_GPIO_USBH_NRESET\n"); > } > > static void __init overo_map_io(void) > -- > 1.6.0.4 > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
