* Eric Witcher <[email protected]> [090907 18:17]: > > On Sep 1, 2009, at 5:55 PM, Steve Sakoman wrote: > >> Enable USB power, use correct gpio for usb_ehci_init >> >> Signed-off-by: Steve Sakoman <[email protected]> > > Tested-by: Eric Witcher <[email protected]> > This patch worked at commit > 3dff8750255bf5a1e9a69931b1d8739a65a933d0 > of linux-omap-2.6.git master
This one should also be updated to pass the configuration in the platform data unless already done with what's in the linux-omap ehci and master branches. Can you please check? > I also needed > > [PATCH 4/8] ehci: fix phy_reset init in ehci probe > [PATCH] omapfb: Reorder Register_framebuffer call > > to get a clean boot. I've added this into omap-fixes queue and merged it also into the linux-omap master branch. Regards, Tony > Build configuration was omap3_beagle_defconfig. > > >> --- >> arch/arm/mach-omap2/board-omap3beagle.c | 5 +++-- >> 1 files changed, 3 insertions(+), 2 deletions(-) >> >> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c >> b/arch/arm/mach-omap2/board-omap3beagle.c >> index 07aee90..65934ea 100644 >> --- a/arch/arm/mach-omap2/board-omap3beagle.c >> +++ b/arch/arm/mach-omap2/board-omap3beagle.c >> @@ -161,7 +161,7 @@ static int beagle_twl_gpio_setup(struct device >> *dev, >> >> /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) >> */ >> gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); >> - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); >> + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); >> >> /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ >> gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; >> @@ -412,7 +412,8 @@ static void __init omap3_beagle_init(void) >> gpio_direction_output(170, true); >> >> usb_musb_init(); >> - usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, true, true, 57, 61); >> + usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true, >> + -EINVAL, 147); >> omap3beagle_flash_init(); >> >> /* Ensure SDRC pins are mux'd for self-refresh */ >> -- >> 1.6.0.4 >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" >> in >> the body of a message to [email protected] >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
