Nishanth Menon <n...@ti.com> writes:

> Folks,
>
> With the addition of FEATURES in l-o, the following prints:
>  - l2cache : Y
>  - iva : Y
>  - sgx : Y
>  - neon : Y
>  - isp : Y
>
> comes up on SDP3430 -> now that we will introduce half a dozen
> features here and there, we will soon clutter this up. we should
> introduce a sysfs entry + remove the above noise..
>

Like Nishanth, I don't like the multi-line noise here.  The patch
below results in a single line output like this instead

OMAP3430/3530 ES3.0 (l2cache iva sgx neon isp )

Not sure why we need to dump features that are not there, but if that
s considered important, maybe prefixing each feature with a '+' or '-'
would still allow this to be collapsed into a single line.

Even with this, I think adding the display of these features into an
OMAP-specific section of /proc/cpuinfo would be even better.

Comments?

Kevin


commit 24f7422bad970cea2ed71d71e3994eeed70f175f
Author: Kevin Hilman <khil...@deeprootsystems.com>
Date:   Tue Oct 13 14:42:00 2009 -0700

    OMAP3: collapse chip feature prints to single line
    
    Signed-off-by: Kevin Hilman <khil...@deeprootsystems.com>

diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 71d5568..b90fcf1 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -249,11 +249,8 @@ void __init omap3_check_revision(void)
 }
 
 #define OMAP3_SHOW_FEATURE(feat)               \
-       if (omap3_has_ ##feat()) {              \
-               pr_info (" - "#feat" : Y");     \
-       } else {                                \
-               pr_info (" - "#feat" : N");     \
-       }
+       if (omap3_has_ ##feat())                \
+               printk (#feat" ");              \
 
 void __init omap3_cpuinfo(void)
 {
@@ -307,13 +304,14 @@ void __init omap3_cpuinfo(void)
        /*
         * Print verbose information
         */
-       pr_info("OMAP%s ES%s\n", cpu_name, cpu_rev);
+       pr_info("OMAP%s ES%s (", cpu_name, cpu_rev);
 
        OMAP3_SHOW_FEATURE(l2cache);
        OMAP3_SHOW_FEATURE(iva);
        OMAP3_SHOW_FEATURE(sgx);
        OMAP3_SHOW_FEATURE(neon);
        OMAP3_SHOW_FEATURE(isp);
+       printk(")\n");
 }
 
 /*
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to